505754
15
Zoom out
Zoom in
Previous page
1/40
Next page

Ŷ Connecting an Aerial (For analogue and digital signals)
To view television channels correctly, a signal must be received by the set from the following source:
-An outdoor VHF/UHF antenna
-Before connecting any external device please connect the supplied 15 pin to RCA adaptor.
Ŷ Connecting External A/V Devices
-Connect a Video RCA cable to an appropriate external A/V device such as a VCR, DVD or Camcorder.
-Connect RCA audio cables to “R - AUDIO - L” and Video on the rear of your set and the other ends to
corresponding audio and Video out connectors on the A/V device.
Ŷ Connecting Component Devices (DVD/PVR)
-Connect Component video and audio cables to Component inputs (“PR”, “PB”, “Y”) on the rear of your set and
the other ends to corresponding component video out connectors on the PVR or DVD.
-The Y, PB and PR connectors on your component devices (PVR or DVD) are sometimes labeled Y, B-Y and R-Y
or Y, CB and CR. (Colours for inputs and cables must correspond on both devices.)
NOTE:
Some devices such as a PVR or DVD player require a ‘Component/YPBPR’signal to be set to output in the
devices settings - please consult your device user manual for instructions.
Ŷ Connecting HDMI
-Supports digital connections between HDMI - enabled AV devices such as (PVRs, DVD, BluRay, HDDVD, AV
receivers and digital devices.).
-No sound connection is needed for HDMI to HDMI connection.
NOTE:
Some devices such as a PVR or DVD players require a HDMI signal to be set to output in the device's settings.
-Please consult your device user manual for instructions.
What is HDMI?
-HDMI, or high-definition multimedia interface, is a high resolution interface that enables the transmission of digital
audio and video signals using a single cable without compression.
-“Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital
audio (5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller in size, has the
HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital
audio.
-Use the HDMI terminal for HDMI connection to a compatible device. If your external device has DVI only, you
should use a DVI-to-HDMI cable (or adapter) for the connection, and the “R -AUDIO - L” terminal on DVI for
sound output.
Ŷ Connecting a Computer
-Connect the D- Sub cable to “VGA” on the rear of your set and the other end to the Video Card of your
computer.
-Connect the stereo audio cable to “VGA AUDIO ” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.
-Primarily this unit is intended for use as an LCD TV. If using as a monitor, and compatibility is a problem; please
contact the manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility is not
warranted.
Setting Up
Connection Instructions
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hisense HL50K316PZL3D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hisense HL50K316PZL3D in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info