742746
13
Zoom out
Zoom in
Previous page
1/148
Next page
– 13 –– 13 –
en
de
fr
it
nl
es
pt
sv
da
no
INSTALLING THE SAW MOUNTING BRACKETS
(FIG. E)
1. Press the locking button (1) and lift up on the cam
latch (2).
2. Place the rear holding clamp (3) on the back rail of
the stand, and then lower the front end of the saw
mounting bracket over the front rail of the stand.
NOTE: Place the saw mounting brackets on the
interior side of the bracket stoppers.
3. Slide the saw mounting bracket to the desired
position, and then push down the cam latch (2) to
lock.
4. Repeat the above steps for the other saw mounting
bracket.
Fig. E
3
1
2
INSTALLING THE ANCHOR PLATES (FIG. F, G)
Please follow the steps below to install the anchor plates
to make the stand stable for operation.
1. Insert an anchor plate (1) through one stand leg (2)
directly, and x the anchor plate (1) to the ground
surface with an anchor (screw, bolt, peg etc.) which
is suitable for the type of ground surface (soil, wood
ooring, concrete etc.).
2. Insert the other anchor plate to diagonal stand leg as
shown in Fig. G. Fix the anchor plate to the ground in
the same way.
WARNING
Ensure that both anchor plates are xed rmly to the
ground and the stand is stable.
Appropriate way to x the anchor plates may di er
according to the type of ground surface. If the anchor
plates are not rmly xed and the stand is unstable,
please take appropriate measures to x the anchor
plates.
Fig. F
1
2
not included
Fig. G
MOUNTING THE MITER SAW TO THE STAND
WARNING
Do not mount the miter saw to the stand without
rst ensuring the stand is extended fully and locked
securely. To set up the stand, follow the instruction
in section “SETTING UP THE STAND” on page 17.
Failure to do so may result in possible injury and
damage to the stand and the miter saw.
Always use the saw mounting brackets and auxiliary
mounting bracket together when mounting the miter
saw to the stand.
Before operating the mounter miter saw, read
carefully the instruction manual for the miter saw.
Using auxiliary mounting brackets (provided)
(FIG. H, I, J, K)
1. Insert two square nuts (1) into the slot on each end of
both auxiliary mounting brackets (2) and slide them
to the middle of the auxiliary mounting brackets.
(Fig. H)
000Book_UU240F.indb 13000Book_UU240F.indb 13 2019/12/26 10:14:042019/12/26 10:14:04
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki UU 240F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki UU 240F in the language / languages: All languages as an attachment in your email.

The manual is 35,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info