742746

Hikoki UU 240F Manual

12
Zoom out
Zoom in
Previous page
1/148
Next page
– 12 –– 12 –
ASSEMBLY
TOOLS NEEDED FOR ASSEMBLY
The stand needs to be assembled by the user. Tools
needed for assembly are:
10 mm wrench, two 17 mm wrenches, 5 mm hex wrench
and a Philips screwdriver.
ASSEMBLY INSTRUCTIONS
WARNING
For your own safety, never connect miter saw plug to any
power source outlet until all assembly and adjustment
steps are completed, and you have read and understood
the safety and operating instructions.
INSTALLING THE WHEELS (FIG. A, B)
1. Unfold the stand with the instruction of “SETTING
UP THE STAND” on page 17.
2. Insert the wheel shaft (1) into the wheel shaft
holder (2). (Fig. A)
3. Attach one long sleeve (3) and one washer (4) to
each side of the wheel shaft (1). (Fig. A)
NOTE: Adjust the wheel shaft (1) making sure the
shaft is the same length on both ends of the stand.
4. Insert one shorter sleeve (5) into each wheel (6), and
attach the wheels (6) to the wheel shaft (1). (Fig. B)
NOTE: The side with more ribs on the wheel should
face inward.
5. Put the washers (7) and lock nuts (8) on the two
ends of the wheel shaft (1) and tighten the wheels by
using two 17 mm wrenches. (Fig. B)
NOTE: Do not overtighten, or wheels will not turn.
Fig. A
3
4
4
1
2
3
Fig. B
6
6
5
5
7
7
8
8
3
3
4
4
INSTALLING THE EXTENSION SUPPORT
ASSEMBLY (FIG. C)
1. Insert the bent extension support (1) into the wheel
side extension support arm (2), and secure with the
height adjustment knob (3).
2. Insert the straight extension support (4) into the
handle side extension support arm (2), and secure
with the height adjustment knob (3).
Fig. C
1
2
3
4
2
3
INSTALLING THE BRACKET STOPPERS (FIG. D)
1. Place one bracket stopper (1) on one of the rail, and
align the hole on the bracket stopper (1) with the
hole (2) on the rail.
2. Insert one lock bolt (3) through the hole of the
bracket stopper and the hole on the rail. Tighten with
the stop nut (4) using the 10 mm wrench.
3. Repeat above steps for installing the other bracket
stopper on the other end of the rail.
Fig. D
3
1
4
2
000Book_UU240F.indb 12000Book_UU240F.indb 12 2019/12/26 10:14:022019/12/26 10:14:02
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki UU 240F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki UU 240F in the language / languages: All languages as an attachment in your email.

The manual is 35,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info