742716
10
Zoom out
Zoom in
Previous page
1/196
Next page
10
English
USING EXTERNAL DEVICES FOR
AUDIO PLAYBACK
Audio can be played back from smartphones, portable
music players and other external devices.
CAUTION
Make sure to lower the volume output of the player
before playback.
NOTE
There are two types of connector cable, straight type and
L type.
Use an L type cable when connecting or storing large
external devices.
1. Open the external device storage area
Switch the radio’s power OFF and open the front cover.
(Fig. 6)
2. Connect an external device
Using a commercially available stereo mini-plug
connector cable (ø3.5 mm), connect the radio’s AUX input
port to the audio output port of the external device. (Fig. 7)
3. Secure the external device
The right and left holders can be moved to the right or left
by pinching the top and bottom of each holder.
Secure the external device between the two holders.
(Fig. 8)
4. Playback
With the radio’s power switched ON, press the Source
select button and display “ ”.
AUX
Make sure to lower the volume output of the external
device before music playback.
Volume can be adjusted through the radio.
(Volume)
Close the front cover after selecting tracks and adjusting
volume.
NOTE
You may be unable to raise the volume level if the
volume level of the external device is too low.
NOTE
When connecting a smartphone, please be aware that
the ringtones of incoming calls for some models are not
output to speaker.
External devices may be damaged if used in locations
exposed to the sun or hot temperatures.
See page 11 when recharging with USB in “
mode.
CONNECTING WITH BLUETOOTH
DEVICES
If smartphones, portable music players and other devices
are Bluetooth compatible, audio can be output from this
product via Bluetooth communication.
1. Pairing (Registering devices)
Pairing is required for Bluetooth communication.
Set your Bluetooth device to pairing mode.
(For instructions on pairing, see the manual for the
Bluetooth device to be used.)
2. Set the radio for pairing mode
Press the Source select button and display “ ”.
Bluetooth
Long press the Play / Stop button (located between
the Search buttons) until the displayed “ is
ashing.
(Long Press) Ready
Select “UR18DSDL” on your Bluetooth device’s list of
connected devices to complete the pairing.
3. Input pass key
Some Bluetooth devices may require pass key input
when connecting.
If this should be the case, input “0000”.
Also, if connection authorization is requested, input
“authorized”.
Connection is successful once “ ” is displayed.
Connected
NOTE
Once paired, connection will be automatically
established the next time the devices are switched on. If
the Bluetooth connection is lost, re-pair the devices.
No more than two devices can be paired simultaneously.
Connection with all Bluetooth devices cannot be
guaranteed. Before attempting connection, always
check for compatibility.
4. Playback
Make sure to lower the volume output of the Bluetooth
device before music playback.
Volume can be adjusted through the radio.
Use the Bluetooth device to select tracks .
You can also select tracks with the radio’s control
buttons.
(Volume)
(Play / Stop, Search)
NOTE
Some Bluetooth devices may not respond to the radio’s
control buttons.
See page 11 when recharging with USB in “
mode.
USING THE TIMER FUNCTION
Setting the sleep timer
Power can be set to automatically switch OFF after a certain
amount of time has elapsed by using the sleep timer function.
1. Press the Menu button.
2. Press the Select button and display “ ”.
Sleep
3. Press the Enter / Information button.
4. Press the Select button to adjust the time period to
elapse (between “0 – 90” minutes) before the power is
switched OFF.
30 Min
5. Press the Enter / Information button.
6. “ ” will be displayed on the LCD.
To check the remaining time, press the Menu button
once again and select “ ”.
To cancel the sleep timer, set the time to switch OFF at 0
minutes.
0000BookUR18DSDL.indb100000BookUR18DSDL.indb10 2020/09/0711:49:322020/09/0711:49:32
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki UR 18DSDL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki UR 18DSDL in the language / languages: All languages as an attachment in your email.

The manual is 181,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info