742716
9
Zoom out
Zoom in
Previous page
1/196
Next page
9
English
<Manual preset registration>
1. Tune into a radio station of your choice and press the
Menu button.
2. Press the Select button and display “ ”.
Preset
3. Press the Enter / Information button.
4. Press the Select button and select a preset number from
0 to 9 for registering the station.
Preset 2
5. Press the Enter / Information button to register the
station.
<Auto preset registration>
This feature allows the automatic registration of available
radio stations in the area of use.
(Maximum of 10 stations)
1. Press the Menu button.
2. Press the Select button and display “ ”.
Auto scan
3. Press the Enter / Information button to begin auto preset
registration of available radio stations.
NOTE
A broadcasting radio station will not be registered if its
frequency is weak.
Depending on location of use, non-radio signals such as
noise may be registered.
See page 11 when recharging with USB in “ ” or
” mode.
For better reception
FM broadcasts
Adjust reception by changing the facing and angle of the
antenna.
” will be displayed when receiving a stereo broadcast.
Switching to monaural reception can reduce noise.
<Switching to monaural reception>
1. Press the Menu button.
2. Press the Select button and display “ ”.
Stereo
3. Press the Enter / Information button.
4. Press the Select button and display “ ”.
OFF
5. Press the Enter / Information button to complete setup.
AM broadcasts
Move the device and face it in a direction in which the
reception is best.
<Volume adjustment>
Use the Volume button to adjust the volume from 0 to 30.
DRC (DYNAMIC RANGE CONTROL)
FOR DAB
DRC can make quieter sounds easier to hear when your
radio is used in a noisy environment.
1. Press the Menu button.
2. Press the Select button and display “ ”.
DRC
3. Press the Enter / Information button.
4. Press the Select button and display “ ”, “ ”or
”.
Half
5. Press the Enter / Information button to complete
adjustment.
ADJUSTING SOUND QUALITY
Sound quality (Bass/Treble) can adjusted according to
preference.
1. Press the Menu button.
2. Press the Select button and display “Select EQ”.
Select EQ
3. Press the Enter / Information button.
4. Press the Select button and display “ ”.
“5” is for maximum bass output.
<
-
> < + >
0 · 1 · 2 · 3 · 4 · 5
Bass 3
5. Press the Enter / Information button.
6. Press the Select button and display “ ”.
“5” is for maximum treble output.
<
-
> < + >
0 · 1 · 2 · 3 · 4 · 5
Treble 3
7. Press the Enter / Information button to complete
adjustment.
NOTE
The radio does not allow Bass or Treble settings of “5” if
the volume level is 25 or more.
If the Bass or Treble is set at “5”, the setting will be
automatically adjusted down to “4” when the volume
level is raised above 25. Moreover, when the volume
level is lowered to 24 or less, the reduced setting will
automatically revert back to “5”.
0000BookUR18DSDL.indb90000BookUR18DSDL.indb9 2020/09/0711:49:322020/09/0711:49:32
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki UR 18DSDL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki UR 18DSDL in the language / languages: All languages as an attachment in your email.

The manual is 181,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info