816297

Hikoki RH650V Manual

7
Zoom out
Zoom in
Previous page
1/48
Next page
7
English
the switch in OFF position. If the switch is
left in ON position when power resumes,
the restart of the fan may cause fi re.
CAUTION
1. Parts of the nozzle supplied are sharp,
so use gloves when removing them
from the case and when attaching or
detaching them.
2. The hot wind release nozzle, the tip of
the nozzle and the material that was
heated are extremely hot during and
immediately after using the tool, so use
gloves and avoid touching them directly.
3. Do not use inside boxes, drawers or
other enclosed spaces.
Aiming it constantly at a single location
may result in the outbreak of smoke or fi re.
4. Make sure the nozzle is at least 5cm
away from the item being heated when
using the tool. Also, do not cover or
otherwise block the nozzle.
Failure to observe this may result in
the Heat Gun overheating, leading to
malfunctions.
5. Do not switch the tool on and off
repeatedly. Also, do not use the tool with
the power cord folded or twisted.
Failure to observe this may result in
malfunctions.
6. Do not point the heat-wind release
nozzle downwards immediately after
use.
Failure to observe this may result in the
tool overheating, leading to malfunctions.
SPECIFICATIONS
Power supply
Type Can be used with both 50 Hz and 60 Hz single-phase current.
Voltage 110 V 120 V to 127 V 220 V to 240 V
Rated electrical
current 11.7 A 11.0 A 7.6 A
Power Input 1375 W 1500 W 2000 W
Capacity
Wind volume 0.25 m3/min to 0.5 m3/min (5-stage switch)
Wind temperature 50°C – 650°C
(In increments of 10°C)
Motor type Direct current motor
Weight 0.79 Kg
STANDARD ACCESSORIES
1 Nozzle (round) ............................................................. 1
2 Nozzle (fl at) ..................................................................1
3 Nozzle (curved surface) ...............................................1
4 Nozzle (glass protector) ...............................................1
5 Scraper (with grip) ........................................................1
6 Case .............................................................................1
Standard accessories are subject to change by area.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Peeling off paint
○ Softening adhesive
○ Removing putty from window frames
○ Forming resin pipes
○ Welding plastic
○ Heat wrapping using heat-shrink fi lm.
○ Soldering
○ Drying work
○ Defrosting work
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms to the
power requirements specifi ed on the product nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the power
switch is in the ON position, the power tool will start
operating immediately, which could cause a serious
accident.
3. Extension cord
When the work area is removed from the power source,
use an extension cord of suffi cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
00BookRH650VWE.indb700BookRH650VWE.indb7 2019/07/249:22:302019/07/249:22:30
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki RH650V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki RH650V in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info