742724
17
Zoom out
Zoom in
Previous page
1/200
Next page
b) Use power tools only with speci cally
designated battery packs.
Use of any other battery packs may create a risk of
injury and re.
c) When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may cause
burns or a re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical
help.
Liquid ejected from the battery may cause irritation
or burns.
6) Service
a) Have your power tool serviced by a quali ed repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and in rm persons away.
When not in use, tools should be stored out of reach
of children and in rm persons.
CORDLESS STAPLER SAFETY
WARNINGS
1. Always assume that the tool contains fasteners.
Careless handling of the stapler can result in
unexpected ring of fasteners and personal injury.
2. Do not point the tool towards yourself or anyone
nearby.
Unexpected triggering will discharge the fastener
causing an injury.
3. Do not actuate the tool unless the tool is placed
rmly against the workpiece.
If the tool is not contact with the workpiece, the fastener
may be de ected away from your target.
4. Disconnect the tool from the power source when
the fastener jams in the tool.
While removing a jammed fastener, the stapler may be
accidentally activated if it is plugged in.
5. Use caution while removing a jammed fastener.
The mechanism may be under compression and the
fastener may be forcefully discharged while attempting
to free a jammed condition.
6. Do not use this stapler for fastening electrical
cables.
It is not designed for electric cable installation and
may damage the insulation of electric cables thereby
causing electric shock or re hazards.
PRECAUTIONS ON USING
CORDLESS STAPLER
1. Safe operation through correct usage.
This tool was designed for driving staples into wood
and similar materials. Use it for its intended purpose
only.
2. Be careful of ignition and explosions.
Since sparks may y during stapling, it is dangerous
to use this tool near lacquer, paint, benzine, thinner,
gasoline, gas, adhesives and similar in ammable
substances as they may ignite or explode. Under no
circumstances should this tool therefore be used in the
vicinity of such in ammable material.
3. Always wear eye protection (protective goggles).
When operating the power tool, always wear eye
protection, and ensure that surrounding people wear
eye protection too.
The possibility of fragments of staples or staples that
were not properly hit entering the eye is a threat to
sight. Eye protection can be bought at any hardware
store. Always wear eye protection while operating this
tool. Use either eye protection or a wide vision mask
over prescription glasses.
Employers should always enforce the use of eye
protection equipment.
4. Protect your ears and head.
When engaged in stapling work please wear ear
mu ers and head protection. Also, depending on
condition, ensure that surrounding people also wear
ear mu ers and head protection.
5. Pay attention to those working close to you.
It would be very dangerous if staples that were not
properly driven in should hit other people. Therefore,
always pay attention to the safety of the people around
you when using this tool. Always make sure that
nobody’s body, hands or feet are close to the staple
outlet.
6. Never point the staple outlet towards people.
Always assume the tool contains fasteners.
If the staple outlet is pointed towards people, serious
accidents may be caused if you mistakenly discharge
the tool. When connecting and check disconnecting
the battery, during staple loading or similar operations,
be sure the staple outlet is not pointed towards anyone
(including yourself). Even when no staples are loaded
at all, it is dangerous to discharge the tool while
pointing it at someone, so never attempt to do so. No
horseplay. Respect the tool as a working implement.
7. Before using the power tool, check the push lever.
Before using the power tool, make sure to check that
the push lever operate properly. Without staples loaded
into the power tool, connect the battery and check
the following. If the sound of operations occurs this
indicates a fault, so in such a case do not use the power
tool until it has been inspected and repaired.
If merely pulling the trigger causes operating sound
of drive bit movement occur, the power tool is faulty.
If merely pushing the push lever against the
material to be stapled causes the sound of drive
bit movement to occur, the power tool is faulty.
Furthermore, with regard to the push lever, please
note that it must never be modi ed or removed.
8. Use speci ed staples only.
Never use staples other than those speci ed and
described in these instructions.
9. Do not carelessly place your nger on the trigger.
Do not place your nger on the trigger except when
actually stapling. If you carry this tool or hand it to
someone while having your nger on the trigger, you
may inadvertently discharge a staple and thus cause
an accident.
10. Completely Close the blade guide and do not open
it during operation.
If stapling is attempted when the blade guide is open,
staples will not be driven into the timber, and there is a
risk of dangerous discharge.
11. Press the staple outlet rmly against the material
to be stapled.
When driving in staples, press the staple outlet rmly
against the material to be stapled. If the outlet is not applied
properly, the staples may rebound.
12. Keep hands and feet away from the ring head
when using.
It is very dangerous for a staple to hit the hands or feet
by mistake.
17
English
0000Book_N14DSL.indb 170000Book_N14DSL.indb 17 2020/04/17 14:16:222020/04/17 14:16:22
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki N 14DSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki N 14DSL in the language / languages: All languages as an attachment in your email.

The manual is 5,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info