816318
6
Zoom out
Zoom in
Previous page
1/116
Next page
6
English
5) Service
a) Have your power tool serviced by a quali ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and in rm persons away.
When not in use, tools should be stored out of reach of
children and in rm persons.
ROUTER SAFETY WARNINGS
1. Hold the power tool by insulated gripping surfaces
only, because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
3. Single-hand operation is unstable and dangerous.
Ensure that both handles are gripped rmly during
operation. (Fig. 20)
4. The bit is very hot immediately after operation. Avoid
bare hand contact with the bit for any reason.
5. Use bits of the correct shank diameter suitable for the
speed of the tool.
DESCRIPTION OF NUMBERED ITEMS
(Fig. 1–Fig. 20)
Lock pin Straight guide
Wrench Guide plane
Loosen Bar holder
Tighten Feed screw
Stopper pole Guide bar
Scale Wing bolt (A)
Depth indicator Wing bolt (B)
Pole lock knob Dial
Stopper block Separate
Loosen the lock lever Router feed
Nut Workpiece
Threaded column Rotation of bit
Cut depth setting
screw Trimmer guide
Template guide Roller
Screw Dust collector
Bit Knob nut
Template
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
M8V2: Router
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Disconnect mains plug from electrical outlet
Class II tool
STANDARD ACCESSORIES
(1) Straight Guide .............................................................1
(2) Bar Holder ....................................................................1
Guide Bar .....................................................................2
Feed Screw ..................................................................1
Wing Bolt .....................................................................1
(3) Template Guide ...........................................................1
(4) Wrench ........................................................................1
(5) Wing Bolt (A) ................................................................4
(6) Lock Spring ..................................................................2
(7) Dust Collector Set ........................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
Woodworking jobs centered on grooving and
chamfering.
000BookM8V2.indb6000BookM8V2.indb6 2022/12/2211:07:522022/12/2211:07:52
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki M8V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki M8V2 in the language / languages: All languages as an attachment in your email.

The manual is 6.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info