816284
9
Zoom out
Zoom in
Previous page
1/184
Next page
9
English
Diamond wheel
(sold separately) Soft brush
O -lock lever Diamond cup wheel
(sold separately)
Mesh
Dust collection adapter
(For diamond cup
wheel)
(sold separately)
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
G13BYEQ2: Disc Grinder
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always operate the power tool with two hands
Not for cut-o operations
When using a cutting-o wheel, be sure to
attach the Type A wheel guard.
When using a type B wheel guard for cutting-o
operations with bonded cut-o wheels, there is
an increased risk of exposure to emitted sparks
and particles, as well as exposure to wheel
fragments in the event of a wheel burst.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
V Rated voltage
Alternating current
nRated speed
min-1 Revolution or reciprocations per minute
Switching ON
Switching OFF
Lock
Unlock
Disconnect mains plug from electrical outlet
Warning
Class II tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
Wheel guard .................................................................1
Guard clip .....................................................................1
Side handle ...................................................................1
Wrench .........................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
Removal of casting n and nishing of various types of
steel, bronze and aluminum materials and castings.
Grinding of welded sections or sections cut by means of
a cutting torch.
Grinding of synthetic resins, slate, brick, marble, etc.
Cutting of synthetic concrete, stone, brick, marble, and
similar materials.
SPECIFICATIONS
Model G13BYEQ2
Voltage 230 V
Power Input 1320 W
Rated speed 8500 min-1
Wheel
Outer dia. 125 mm
Hole Dia. 22.23 mm
Thickness 6 mm
Peripheral speed 80 m/s
Weight*12.4 kg
*1 Weight: According to EPTA-Procedure 01/2014
(Including wheel guard, wheel washer, wheel nut, and
handle; without cord)
Electronic control
Soft start
Reduces recoil against the operator by managing the
number of rotations during startup.
0 Voltage Re-start Protection
The 0 voltage restart protection feature prevents the
power tool from restarting after the power has been
temporarily cut o during operation.
Constant speed
Overload protection
This protection feature cuts o the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate causes
of overloading.
After that you can use it again.
00BookG13BYEQ2.indb900BookG13BYEQ2.indb9 2022/12/2715:35:042022/12/2715:35:04
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki G13BYEQ2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki G13BYEQ2 in the language / languages: All languages as an attachment in your email.

The manual is 7.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info