816400
4
Zoom out
Zoom in
Previous page
1/152
Next page
4
English
Delay the feed speed when cutting the material into
small circular arcs. An unreasonably fast feed may break
the blade.
Plunge cutting (Fig. 12 and 13)
Avoid plunge cutting for metallic materials. This can
easily damage the blade.
Never pull the switch trigger while the tip of the saw
blade tip is pressed against the material. If you do so, the
blade can easily be damaged when it collides with the
material.
Make absolutely sure that you cut slowly while holding
the body rmly. If you apply any unreasonable force to
the saw blade during the cutting operation, the blade can
easily be damaged.
14. The motor can be locked sometimes, depending
on the combination of the material to be cut and the
blade. Whenever the motor gets locked, switch it o
immediately.
15. Never touch moving parts.
Never place your hands, ngers or other body parts near
the tool’s moving parts.
16. Never operate without all guards in place.
Never operate this tool without all guards or safety
features in place and in proper working order. If
maintenance or servicing requires the removal of a
guard or safety feature, be sure to replace the guard or
safety feature before resuming operation of the tool.
17. NEVER leave tool running unattended. Turn power o .
Don’t leave tool until it comes to a complete stop.
18. The power tool is equipped with a temperature
protection circuit to protect the motor. Continuous work
may cause the temperature of the unit to rise, activating
the temperature protection circuit and automatically
stopping operation. If this happens, allow the power tool
to cool before resuming use.
19. Do not give a strong shock to the switch panel or break it.
It may lead to a trouble.
NAMES OF PARTS (Fig. 1 – Fig. 13)
Blade holder
Blade
Base
Base lever
Change lever
Handle
Switch trigger
Switch stopper
Motor
Front cover
Housing
Name plate
Hook
Switch palel
Mode selector switch
Blade hole
Lever
Slit of plunger
Another blade
Stroke
Machine oil
Air gun
SYMBOLS
WARNING
The following show symbols used for the machine. Be
sure that you understand their meaning before use.
CR13VEY: Reciprocating Saw
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/
EU on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Switching ON
Switching OFF
Lock
Switch locks to the “ON” position.
Mode selector switch
Mode indicator lamp
Minimum speed mode
Minm
Low speed mode
Lm
Middle speed mode
Mm
High speed mode
Hm
Max. speed mode
Maxm
Straight mode
Orbital mode
Straight cutting
0000BookCR13VEY.indb40000BookCR13VEY.indb4 2022/02/0215:39:582022/02/0215:39:58
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki CR13VEY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki CR13VEY in the language / languages: All languages as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info