816371
6
Zoom out
Zoom in
Previous page
1/172
Next page
6
English
Table 1
Indications of the pilot lamp
Symbol mark
Pilot lamp
(red)
Before
charging Blinks Lights for 0.5 seconds. Does not light
for 0.5 seconds. (o for 0.5 seconds)
While
charging Lights Lights continuously
Charging
complete Blinks Lights for 0.5 seconds. Does not light
for 0.5 seconds. (o for 0.5 seconds)
Overheat
standby Blinks Lights for 1 second. Does not light
for 0.5 seconds. (o for 0.5 seconds)
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
Charging
impossible Flickers Lights for 0.1 seconds. Does not light for
0.1 seconds. (o for 0.1 seconds)
Malfunction in the battery
or the charger
Regarding the temperatures and charging time of the
battery.
The temperatures and charging time will become as
shown in Table 2.
Table 2
Charger
Battery UC10SL2
Charging voltage V 10.8
Weight kg 0.35
Type of battery Li-ion
Temperatures at which the
battery can be recharged 0oC 50oC
Charging time for battery
capacity, approx. (At 20oC)
1.3 Ah
1.5 Ah
3.0 Ah
min.
min.
min.
25 (3 cells)
30 (3 cells)
60 (6 cells)
NOTE
The recharging time may vary according to the ambient
temperature and power source voltage.
4. Disconnect the charger’s power cord from the
receptacle.
5. Hold the charger rmly and pull out the battery.
NOTE
Be sure to pull out the battery from the charger after use,
and then keep it.
CAUTION
If the battery is charged while it is heated because it has
been left for a long time in a location subject to direct
sunlight or because the battery has just been used, the
pilot lamp of the charger lights for 1 second, does not
light for 0.5 seconds (o for 0.5 seconds). In such a case,
rst let the battery cool, then start charging.
When the pilot lamp ickers (at 0.2-second intervals),
check for and take out any foreign objects in the charger’s
battery connector. If there are no foreign objects, it is
probable that the battery or charger is malfunctioning.
Take it to your authorized Service Center.
Since the built-in micro computer takes about 3 seconds to
con rm that the battery being charged with charger is taken
out, wait for a minimum of 3 seconds before reinserting
it to continue charging. If the battery is reinserted within
3
seconds, the battery may not be properly charged.
MOUNTING AND OPERATION
Action Figure Page
Removing and inserting the
battery 1161
Charging 2 161
Mounting the blade 3 161
Removing a broken blade 4 161
Maintenance and inspection of
saw blade mount 5162
Base setting 6 162
Switch Operation 7 162
Select a saw blade of the
appropriate length 8162
Securing the materials to be cut 9 163
Plunge cutting 10 163
How to use the LED light 11 163
Battery level warning lamp
(Indicates that the battery level is
low and requires recharging.) 12 163
Selecting accessories 164
0000BookCR10DL.indb60000BookCR10DL.indb6 2022/02/0215:26:232022/02/0215:26:23
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki CR10DL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki CR10DL in the language / languages: All languages as an attachment in your email.

The manual is 10.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info