The so-called VICE VERSA outputsignal is a special crossover configuration, which is only applicable, if the LINE OUT of the HIFONICS
X4-ZEUS/BOLTAR amplifier should be used to provide an audiosignal to an additional amplifier. Hence, the complete crossover settings
for both amplifiers are only done by the HIFONICS X4-ZEUS/BOLTAR amplifier. Thereby no crossover settings on amplifier 2 are necessary,
because amplifier 2 gets a already modificated signal by the HIFONICS X4-ZEUS/BOLTAR amplifier.
In LP/BP-Mode (Example 1) a highpass signal will be transferred to amplifier 2.
In HP-Mode (Example 2) a lowpass signal will be transferred to amplifier 2.
Here are two examples for the VICE VERSA function:
INTERCONNECTION EXAMPLES: VICE VERSA
HiFONICS X4-ZEUS/BOLTAR
for subwoofer operation (mono)
AMPLIFIER 2 (any device)
for stereo-speaker-system (high pass-mode)
Connect to head unitCINCH/RCA LINE OUTCINCH/RCA LINE IN
Settings HiFONICS X4-ZEUS/BOLTAR amplifier:
The X4-ZEUS/BOLTAR amplifier must be in LP/BP mode, this means the on this amplifier
interconnected speaker or subwoofer is provided with a lowpass/bandpass-signal.
Now the VICE VERSA outputsignal on LINE OUT could be modified by the HIGH PASS-
controller of the X4-ZEUS/BOLTAR amplifier.
Settings amplifier 2:
The additional amplifier must be switched to FULL or FLAT mode (full range) for
the regular loudspeaker operation.
The crossover settings will be taken over by the X4-ZEUS/BOLTAR amplifier.
Only the level controllers needs to be aligned accordingly. Check in this case the
owner’s manual of the regarding amplifier.
NOTE: If amplifier 2 owns a variable lowpass-filter, it’s possible to generate a
bandpass-signal (e.g. for providing kickbass woofers).
ADVANTAGE:
This VICE VERSA-constellation allows you to use the high power effciency of a X4-ZEUS/BOLTAR amplifier for the interconnected subwoofer and allows to use at the same time
the very high-valued highpass filter (variable between 10-4000 hz). The audiophile sound characteristics will be transferred to amplifier 2. Hence, amplifier 2 works as pure power-
amplifier without any pre-amplifier modifications and provides the usual X4-amplifier high-end-sound for the interconnected speakers, without beeing a X4-model.
As a matter of course this constellation also works with two X4-models.
Settings HiFONICS X4-ZEUS/BOLTAR amplifier:
The X4-ZEUS/BOLTAR Amplifier must be in HP mode, this means the on this amplifier
interconnected speakers are provided with a highpass-signal.
Now the VICE VERSA outputsignal on LINE OUT could be modified by the LOWPASS-
and SUBSONIC controller of the X4-ZEUS/BOLTAR Amplifier.
Settings Amplifier 2:
The additional amplifier must be switched to FULL- or FLAT operation mode
(Fullrange).
The crossover settings will be taken over by the X4-ZEUS/BOLTAR Amplifier.
Only the level controllers needs to be aligned accordingly.
Check in this case the owner’s manual of the regarding amplifier.
ADVANTAGE:
This VICE VERSA-constellation allows you to use the very high-valued highpass filter (variable between 10-4000 hz) as well as the audiophile sound characteristics of the
X4-ZEUS/BOLTAR amplifier for the interconnected speakers and allows you to use at the same time the very dynamic high-valued bass-filters (lowpass 40-4000 Hz,
subsonic 10 - 150 Hz and 12/24dB octave slopes ) for amplifier 2, which receives a already modified audiosignal. Hence, amplifier 2 works as pure power-amplifier without any
pre-amplifier modifications and provides the usual X4-amplifier high-end-basssound for the interconnected subwoofer, without beeing a X4-model.
As a matter of course this constellation also works with two X4-models.
VICE VERSA 1
VICE VERSA 2
HiFONICS X4-ZEUS/BOLTAR
for stereo-speaker-system (high pass-mode)
AMPLIFIER 2 (any device)
for subwoofer operation (mono)
Connect to head unitCINCH/RCA LINE OUTCINCH/RCA LINE IN
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hifonics x4-Boltar - Zeus at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hifonics x4-Boltar - Zeus in the language / languages: English, German as an attachment in your email.
The manual is 3,54 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
