700153
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
ENG|OPERATIONAL INSTRUCTIONS
INTERCONNECTION EXAMPLE Master/Slave Mode
INTERCONNECTION MASTER
Connect the RCA lineouts of the headunit with the RCA jacks LINE IN of the amplifier with appropriate high-value RCA cables.
If your headunit is equipped with a additional subwoofer lineout (SUB OUT), it is recommended to use this lineout.
Connect the remote wire (REM) to the remote terminal (REM) of the MASTER amp.
Connect the bass level controller only on the BASS LEVEL CONTROLLER port of the MASTER amp.
INTERCONNECTION SLAVE
Connect the RCA jack MASTER OUT of the MASTER amp with the RCA jack SLAVE IN of the SLAVE amp with appropriate
high-value RCA cable.
Connect the remote wire (REM) of the remote terminal (REM) of the MASTER amp with the remote terminal (REM) of the SLAVE amp.
Use therefore cable with a minimum profile section of 0,5 mm
2
.
INTERCONNECTION SUBWOOFER
• See page 23.
SETTINGS MASTER
• The MODE switch should be in MASTER position.
Check the information of LPF, SUB SONIC, PHASE, LEVEL, BOOST and BASS LEVEL CONTROLLER on page 21.
SETTINGS SLAVE
• The MODE switch must be in SLAVE position.
In the SLAVE mode all controllers of the SLAVE amp are without function.
Only the already modified audiosignal of the MASTER amp will be amplified.
1. Connect Stereo RCA output (L/R
or SUB OUT) of the headunit with the
LINE IN CH1/2 of the MASTER amp
Connect the bass level controller
BLC-TSi and the remote terminal
on the amplifier (MASTER)
with the enclosed cable.
Switch setting: MASTER
SLAVE
MASTER
Switch setting: SLAVE
Remote wire REM
Steuerleitung REM
2. Connect the RCA output (MASTER
OUT) of the MASTER amp with the
SLAVE IN of the SLAVE amp
1.
2.
The Master/Slave-Mode is only with two identical HiFonics TITAN TSi amplifiers possible.
This means either with two TSi1000-I or with two TSi-1500-I models.
NOTE!
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics TSi1000-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics TSi1000-I in the language / languages: English, German as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info