700123

Hifonics TRX6006 DSP Manual

29
Zoom out
Zoom in
Previous page
1/40
Next page
29
FUNCTIONAL INSTRUCTIONS
2. SOURCE:
• Here you can choose between the different input sources SPDIF (optical input), MAIN (RCA audio inputs), AUX (RCA stereo input).
WiFi is currently not supported.
3. CH-SETTING:
• Here you select the particular output channels or output channel pairs in which you want to change the settings.
You have the option to link the respective channel pairs for L and R with the lock symbol in the middle to synchronize the settings for
both channels. With L-> R COPY you can also copy the setting of the currently selected left channel to the right channel.
4. CROSSOVER:
• Here you can select the required lter type (FILTER TYPE OFF, HP, BP or LP)
and set under FREQUENCY the desired cut-off frequency. The sliders only work
when the particular lter type is activated. As soon a lter type is selected, it will be
displayed graphically under point 8.
Note: If you have selected a lter type, the cut-off frequency can also be changed
under point 8 with the mouse. Click and hold the red dot and move the cursor to
the desired location on the frequency band.
• Hint: Instead of using the slider, you can also type in the cut-off frequency directly
with the keyboard after a double click on the values below FREQUENCY.
Conrm by pressing ENTER.
5. GAIN:
• Here you can reduce the level of the individual Outputs A – H from 0dB to -40dB. With MUTE you can mute the respective channel.
If necessary, you can use MUTE under MAIN to mute all output channels.
• In addition, under MAIN, the total output level of the DSP amplier (-40dB to + 12dB) can be adjusted.
Attention: Use this control with caution. Too loud level could seriously damage your speakers.
6. DELAY:
• Here you can adjust the time delay and phase shift of the individual Outputs A – H. For each output channel channel you can individ-
ually set the time delay of the signal under DELAY. Above PHASE, the unit of delay can be switched between ms (milliseconds) and
cm (centimeters).
Hint: Instead of using the slider, you can also type in the value directly with the keyboard after a double click on the values above the
sliders. Conrm by pressing ENTER.
• Below the sliders you can switch the phase from 0° to 180 ° individually for each channel.
• With these two functions you can match your sound system to the vehicle acoustics and adjust the acoustic stage perfectly.
7. HP SLOPE / LP SLOPE - CONFIGURATION OF SLOPE:
• Select under HP/SLOPE the desired slope of the high-pass lter and under LP/SLOPE the slope of the low-pass lter, which is se-
lectable in 6dB steps, starting from 6 dB per octave (very at) to 48 dB per octave (very steep).
Note: The HP/SLOPE or LP/SLOPE control panel is inactive (gray), if under 4. CROSSOVER HP, LP and BP is not selected.
8. FREQUENCY BAND PREVIEW:
• The frequency band shows graphically the envelope of the 31-band equalizer (point 9) and the currently selected settings of the
output channel or output channel pair from point 3.
9. 31-BAND EQUALIZER:
• With the sliders below you can set the desired dB value (-18 to +12) between 20 Hz to 20000 Hz for each output channel (except
subwoofer channels G & H: 11-band equalizer 20 Hz - 200 Hz).
Below the individual sliders you can enter the Q (quality) as numeric value (0.5 for very shallow to 9 for very steep).
With ByPass you can switch off the Equalizer function.
Press the RESET button to reset all Equalizer settings to default (All other settings are not affected by this).
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics TRX6006 DSP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics TRX6006 DSP in the language / languages: English, German as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info