700123
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
FUNCTIONAL INSTRUCTIONS
Connect the stereo RCA output (L/R) of the head unit
with LINE IN FL/FR of the amplier.
Tweeter
L & R
each 2 – 8 Ohms
Midbass
L & R
each 2 – 8 Ohms
Connect the Remote Controller
with the enclosed cable
Connect the USB port to the Com-
puter with the enclosed USB cable
INTERCONNECTION
Connect the RCA lineouts of the head unit with the RCA jacks LINE IN of the amplier with appropriate high-value RCA cables.
Connect the tweeters with the SPEAKER OUTPUT + A - and + B -, the midbasses with + C - and + D - and the kickbasses with + E
and F - by using appropriate high-value cables.
Ensure that the total impedance load on each channel pair A/B, C/D and E/F is not lower than 2 ohms.
REMOTE CONTROLLER
Refer to page 7.
DSP-SOFTWARE SETTINGS
Now connect the DSP amplier via the included USB cable to the computer on which you installed the DSP software before.
Important: Until you have made all basic settings, turn down the volume control of the head unit all the way left to the lowest setting to
avoid damage to the sound system.
STARTING THE PROGRAM
Turn on the head unit (radio) and thus the DSP amplier. Start the DSP
software. Please also refer to the information on page 8 and 9.
Note: Reduce the volume immediately to avoid damage especially to
the tweeters without passive crossovers.
CONFIGURATION OF INPUT CHANNELS
1. Chose under INPUT MODE the setting 2CH.
Note: If you do not operate an additional amplier on the audio output
LINE OUT G/H, no adjustments on channel pair G/H are required.
INTERCONNECTION EXAMPLE
6-channel-mode: 3-Way Active System
Kickbass
L & R
each 2 – 8
Ohms
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics TRX6006 DSP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics TRX6006 DSP in the language / languages: English, German as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info