700119
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
FUNCTIONAL INSTRUCTIONS
PROCESSOR FEATURES AND OPERATIONAL CONTROLS
6
5
4
3
1
The SUB IN RCA jacks must be connected with the RCA output jacks of the head unit (Subwoofer Output).
The LINE IN RCA jacks must be connected with the RCA output jacks of the head unit (2 x Stereo Output Front/Rear).
The HIGH LEVEL INPUT (enclosed cable set with plug) can be used, if your head unit is not equipped with RCA pre-amplier
outputs. You can connect then instead the loudspeaker outputs of your head unit with the highlevel input cable set accordingly
(refer to the assignment on the next page right above.
Note: Please also refer to the information AUTO TURN ON function on page 19, section #2.
Note: Never use the HIGH LEVEL INPUT function and the RCA inputs (#6 and #8) at the same time together. This may
damage the electronics of the processor.
The AUX IN 3,5 mm jack can be connected with with external audio sources like MP3 player, smartphones, navigation systems.
The eight LINE OUT RCA jacks provide audio signals for ampliers, which can be modied and congurated with the DSP soft-
ware.
The REMOTE port is for the enclosed remote controller. Please refer to the information on the next page.
The OPTICAL input is suited for a Toslink cable connection with an external audio source that provides a SPDIF signal (stereo
PCM).
If necessary, connect the mini-USB port by using the enclosed USB cable to the computer on which the M-CONTROL soft-
ware is installed. The connection can be released after using the DSP software.
Do not extend the cable in any way with a passive USB extension because otherwise a awless communication between the
DSP processor and the PC can not be ensured. If you have to bridge longer distances, use an active USB extension with
integrated repeater. The LED next to the USB port lights up blue when a connection between DSP device and computer is
made via the USB cable.
If the POWER LED lights up, the amplier is ready for operation.
4 5 6 8 97
+
POWER
USB
OUTPUT
FLFR
REMOTE
PC LINK
GND
+12V
REM OUT
REM IN
RLRRSUB LSUB R
AUX
INPUT
MAIN
INPUT
MAIN
AUX
OPTICAL
INPUT SEL.MODE OK
OPTICAL
INPUT
A B C D E F G H
POWER INPUT
M8-DSP DIGITAL SOUND PROCESSOR
HIGH LEVEL INPUT
+
POWER
USB
OUTPUT
FLFR
REMOTE
PC LINK
GND
+12V
REM OUT
REM IN
RLRRSUB LSUB R
AUX
INPUT
MAIN
INPUT
MAIN
AUX
OPTICAL
INPUT SEL.MODE OK
OPTICAL
INPUT
A B C D E F G H
POWER INPUT
M8-DSP DIGITAL SOUND PROCESSOR
HIGH LEVEL INPUT
1 2
3
8
7
9
2
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics M8-DSP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics M8-DSP in the language / languages: English, German as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info