700119
18
Zoom out
Zoom in
Previous page
1/32
Next page
18
MECHANICAL INSTALLATION
INSTALLATION INSTRUCTIONS
Before you start with the installation of the sound system, disconnect necessarily the GROUND connection wire from the
battery to avoid any risk of electric shocks and short circuits.
Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gastank or the like.
Ensure that the chosen location provides a sufcient air circulation for the processor. Do not mount the device into small or sealed spaces
without air circulation near by heat dispersing parts or electrical parts of the vehicle.
Do not mount the processor on top of a subwoofer box or any other vibrating parts, whereby parts could loosen inside.
The wires and cables of power supply and the audio signal must be as short as possible to avoid any losses and interferences.
NOTE
1
4 x
4 x
4 x
4 x
3
2
4
At rst you need to nd a suitable installation location for
the processor. Ensure that enough space for the installati-
on of the cables remains and that they will not be bended
and have sufcient pull relief.
Drill
Mounting hole
Mounting hole
Marking
Pen or
peening
tool
Mounting
screw
Lay the processor aside and then drill the holes for the
mounting screws at the marked locations.
Please ensure not to damage any components of the ve-
hicle while you drilling the holes. Alternatively (depends
on the material of the surface) you can also use self-tap-
ping screws.
Keep the processor at the chosen mounting location in
the vehicle. Then mark the four drill holes with an appro-
priate pen or peening tool through the designated moun-
ting holes at the processor.
Then uphold the processor to the chosen position and
x the screws through the mounting holes into the drilled
screwholes.
Ensure that the mounted processor is tightly xed and
can not come loose while driving.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hifonics M8-DSP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hifonics M8-DSP in the language / languages: English, German as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info