488783
33
Zoom out
Zoom in
Previous page
1/44
Next page
33
6 More recording features
Automatically
numbering
tracks
If you're recording from CD, MD,
DCC or DAT, you can usually let
the recorder number the tracks
automatically as they change on
the source material. When
recording other digital or analog
sources, the recorder will start a
new track if it detects more than
2 seconds of silence. However if
you’re recording noisy source
material or a classical recording
with long quiet sections, the
recorder may not always
regognize the gap between
tracks. For this reason you can
adjust the level of sound that the
recorder regards as ‘silence’.
Each input (analog, coaxial and
optical) has its own threshold
level, which can be set
independently.
Note: The minimum analog
threshold level is -66dB.
1 When the recorder is
stopped, press MENU/
DELETE.
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
MENU/
DELETE
TEXT
SYNCHRO
PROFESSIONAL
2,3
1
ENTER
CURSOR
MENU/
DELETE
TEXTMARK
SET
CLEAR
TITLE
/MODE
7
1
¡
8
3
4
¢
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
REC SYNCHRO
REPEAT RANDOM NAME CLIP
I
NPUT
SELECTER
FADER
SKIP PLAY
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
SKIP ID
PROGRAM CHECK CLEAR
AUTO /
MANUAL
123
4
56
78
9
10/0 >10
SCROLL
DISPLAY
•
1
2
3
2 Turn the jog dial until A.LVL
appears in the display, then
press to ENTER.
The display shows the current
‘silence’ threshold for automatic
track numbering. The default is -
54dB.
3 Turn the jog dial (
44
44
4 and
¢¢
¢¢
¢ on the remote) to
change the threshold level.
Turning the dial cycles through
the following levels:
-78dB to -66dB Use these
levels if you find the recorder is
putting in new track numbers
during very quiet sections of
classical music, for example.
-60dB to -48dBA ‘mid’ level
suitable for most recordings.
-42dB to -24dBIf you find that
the recorder is not putting in new
track numbers because the
original source is too noisy.
4 Press the jog dial (ENTER)
to confirm the new level.
If the AUTO TRK indicator is not lit,
press AUTO/MANUAL to switch it
on. To check that tracks will
start at the correct points on the
recording, see
Monitoring a
source
on page 36.
Manually
numbering
tracks
Although automatic track
numbering is the default mode of
the recorder, you can number
tracks manually as recording is
taking place. In some cases—
such as recording from digital
mixer, or from an analog
source—auto track numbering
may not work reliably (in these
cases, a new track is started
after the recorder detects two
seconds of silence), and it's
better to use manual track
numbering.
Remember: It is not possible to
edit track numbers after
recording.
1 Make sure automatic track
numbering is switched OFF.
If the AUTO TRK indicator is lit,
press AUTO/MANUAL to switch it
off.
2 Start recording.
You can use manual numbering in
any record mode, but it is best
suited to manual digital-input or
analog-input recording (see page
18 for more on these recording
modes).
3 Press RECORD
at any
point you want a new track
to start.
CD tracks must be at least four
seconds long—the recorder won’t
let you start a new track less
than four seconds into the
current track.
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
MENU/
DELETE
TEXT
SYNCHRO
PROFESSIONAL
3
MONITOR
INPUT
SELECTOR
AUTO
MANUAL
TITLE/MODE
TRACK NO.
WRITE
DISPLAY
FINALIZEERASE
SCROLL
CD TEXT
1
MENU/
DELETE
TEXTMARK
TITLE
/MODE
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
REC SYNCHRO
AUTO /
MANUAL
123
4
56
78
9
SCROLL
DISPLAY
•
1
3
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HHB CDR-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HHB CDR-830 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info