488783
23
Zoom out
Zoom in
Previous page
1/44
Next page
23
4 Getting started
Setting the
digital recording
level
One of the advantages of digital-
to-digital recording is that you
don't have to set recording
levels—and risk distortion by
overloading the disc. With pre-
recorded material, the digital level
has usually been optimized and
you shouldn't need to change it. If
you're making a digital copy of a
CD, DAT or MD that was not
optimally produced and that was
consistently under-recorded, you
can boost the overall level by up
to +20dB. Remember though,
that any peaks in the original
recording run the risk of
distorting the copy.
In many other digital recording
applications, you may also have
cause to boost the recording
volume since the volume of some
digital sources can be relatively
low, but again, if there are any
peaks in the source material, you
run the risk of momentary
distortion.
It's also possible to reduce the
digital recording volume, but in
most cases, this is not desirable.
However, if you're putting
together a mix CD (various tracks
compiled from different sources),
and there is a track which stands
out as generally louder than the
others, then you might want to
reduce the level of that track.
Note that this feature will not
remove distortion already on the
source material.
Once changed, the new digital
recording level remains until you
change it again, or reset it. Each
digital input has its own level
which can be set independently.
Note: If you are recording DTS
encoded audio CDs or HDCD
format CDs, the digital recording
level must be set to 0.0dB for
recording.
MONITOR
INPUT
SELECTOR
AUTO
MANUAL
TITLE/MODE
TRACK NO.
WRITE
DISPLAY
FINALIZEERASE
SCROLL
CD TEXT
1
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
MENU/
DELETE
TEXT
SYNCHRO
PROFESSIONAL
4,5,6
3
4,6
ENTER
CURSOR
MENU/
DELETE
TEXTMARK
SET
CLEAR
TITLE
/MODE
7
1
¡
8
3
4
¢
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
REC SYNCHRO
REPEAT RANDOM NAME CLIP
I
NPUT
SELECTER
FADER
SKIP PLAY
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
SKIP ID
PROGRAM CHECK CLEAR
AUTO /
MANUAL
123
4
56
78
9
10/0 >10
SCROLL
DISPLAY
•
5
3
1
1 Make sure one of the
digital inputs is selected.
Pressing INPUT SELECTOR
repeatedly switches the active
input:
Analog - Optical - Coaxial
The recorder's display indicates
the current input.
2 Make sure the recorder is
stopped, then press
RECORD
(
REC on the
remote control).
The recorder goes into record-
pause. (You can also press
MONITOR.)
3 Press MENU/DELETE.
4 Turn the jog dial until D.
VOL appears in the display,
then press to ENTER.
If there is nothing connected to
the selected digital input, the
message DIN UNLOCK appears in
the display.
The display shows current digital
recording level.
5 Turn the jog dial or press
44
44
4 or
¢¢
¢¢
¢ on the remote
control to adjust the re-
cording level up or down.
The maximum adjustment
possible is between
MIN(silence) and +20dB.
Pressing the jog dial (
ENTER)
and holding for 3 seconds
resets to OdB.
6 Press the jog dial (ENTER)
to confirm the digital
recording level.
2
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HHB CDR-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HHB CDR-830 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info