761786
70
Zoom out
Zoom in
Previous page
1/101
Next page
MY20H08-2_1.0_30.08.2019 70
Operation
6.13.2 Using the back-pedal brake
Only applies to pedelecs with this equipment
The best braking effect is achieved if the pedals
are in the 3 o'clock and 9 o'clock position when
braking. To bridge the free travel between the
riding movement and the braking movement, it is
recommendable to pedal a little beyond the
3 o'clock and 9 o'clock position before you pedal
in the opposite direction to the direction of travel
and start braking.
Pedal in the opposite direction to the direction of
travel until the desired speed has been reached.
6.14 Suspension and damping
6.14.1 Adjusting the compression of the
Fox fork
Only applies to pedelecs with this equipment
The compression adjuster makes it possible to
make quick adjustments to the suspension
behaviour of the fork to suit changes in terrain. It
is intended for adjustments made during the ride.
Figure 72: FOX compression adjuster with the OPEN (1)
and HARD (2) positions
Compression damping is lowest in the OPEN
position, making the fork feel softer. Use the
HARD position if you want to the fork feel stiffer
and you are riding on soft ground. The lever
positions between the OPEN and HARD
positions enable fine adjustment of compression
damping.
We recommend setting the lever of the
compression adjuster to the OPEN mode position
first.
6.14.2 Adjusting the compression of the
Fox damper
Only applies to pedelecs with this equipment
The compression adjuster makes it possible to
make quick adjustments to the suspension
behaviour of the damper to suit changes in terrain.
It is intended for adjustments made during the
ride.
Figure 73: FOX compression adjuster on the rear frame
damper with the OPEN (1), MEDIUM (2) and HARD (3)
positions
Use the OPEN position for rough descents, the
MEDIUM position for rough terrain and the HARD
position for efficient climbing. First set the
compression adjuster to the OPEN position.
Figure 74: Fine adjustment of the OPEN position is made
using the adjuster (4)
The FOX rear frame damper features fine
adjustment for the OPEN position.
We recommend that fine adjustments be made
when the compression adjuster is in the MEDIUM
or HARD position.
Pull out the adjuster.
Turn the adjuster to position 1, 2 or 3. Setting 1 is
for the softest riding performance, whereas 3 is
for the hardest.
Press the adjuster in to lock in the setting.
1
1
2
1
2
3
4
3
2
1
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Panasonic Pedelec 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Panasonic Pedelec 2020 in the language / languages: English as an attachment in your email.

The manual is 12,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Panasonic Pedelec 2020

Hercules Panasonic Pedelec 2020 User Manual - German - 105 pages

Hercules Panasonic Pedelec 2020 User Manual - Dutch - 104 pages

Hercules Panasonic Pedelec 2020 User Manual - French - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info