761552
43
Zoom out
Zoom in
Previous page
1/94
Next page
MY20H01-12_1.0_28.05.2019 43
Operation
6.3.2.1 Adjusting the seat height with
quick release
Open the quick release on the seat post to
change the seat height. To do so, push the
clamping lever away from the seat post.
Figure 42: Seat post quick release (3)
The seat post quick release with clamping
lever (5) and setting bolt (4) in the open
position (1) and in the direction of the closed
position (2)
Set the seat post at the required height.
.
Figure 43: Detailed view of the seat post examples of the
minimum insertion depth marking
To close it, push the seat post clamping lever as
far as it will go into the seat post.
Check the clamping force of quick releases.
6.3.2.2 Height-adjustable seat post
Only applies to pedelecs with this equipment
When using your seat post for the first time, you
must give it a firm push downwards to set it in
motion. This is due to the natural tendency of the
seal to repel oil from the seal surface. You only
need to do this before the first use or after a
longer period of non-use. Once you have
displaced the post through its deflection, the oil
spreads on the seal and the post begins to
function normally.
Figure 44: The seat post activation lever can be mounted
either on the left (1) or the right (2) side of the handlebars
Lowering the saddle
To lower the saddle, press your hand down on the
saddle or sit on the saddle. Press the seat post
activation lever and hold it down.
Release the lever once you have reached the
required height.
Raising the saddle
Pull the seat post activation level.
Remove any pressure on the saddle and
release the lever once you have reached the
required height.
6.3.2.3 Adjusting the seat position
The saddle can be shifted on the saddle frame.
The right horizontal position ensures an optimal
leverage position for legs. This prevents knee
pain and painful incorrect pelvis positions. If you
have displaced the saddle more than 10 mm, you
then need to adjust the saddle height again since
both settings affect one another.
To adjust the seat position safely, either push the
pedelec near to a wall, so that you can lean on the
wall to support yourself or ask another person to
hold the pedelec for you.
Climb onto the bicycle.
Place the pedals into the vertical position
(3 o'clock position) with your feet.
Crash caused by an excessively high seat post
setting
A seat post with is set too high will cause the seat
post or the frame to break. This will cause a crash
with injuries.
Do not pull the seat post out of the frame
beyond the minimum insertion depth marking.
3
4
5
1
2
3
CAUTION
!
3
4
2
1
e
tiert w
se Position zur Be
aber in einem spätere
ochmals montieren.
Sie den mitgelieferten Winkel mit de
orrichtung und stecken Sie die Hülle in die
nvorrichtung.
der
Remotehebel
5
Oder
28
12
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hercules Brose 14d Pedelec Display 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hercules Brose 14d Pedelec Display 2020 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hercules Brose 14d Pedelec Display 2020

Hercules Brose 14d Pedelec Display 2020 User Manual - German - 93 pages

Hercules Brose 14d Pedelec Display 2020 User Manual - Dutch - 92 pages

Hercules Brose 14d Pedelec Display 2020 User Manual - French - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info