647375
15
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 15
8. + / STOP VACUUM Key
Function during cycle Interruption of the active function during the program cycle. The cycle immediately
continues with the next function.
Function in program mode Raise the value of the selected function within the program selected in the program
mode.
9. - / STOP Key
Function during cycle Terminates the program cycle completely. The cycle immediately switches to the
ventilation function.
Function in program mode Lower the value of the selected function within the program selected in the program
mode.
10. Vacuum meter
Displays the pressure in the vacuum chamber. See the following table for the relationship between the vacuum meter
and the percentage vacuum.
Position
vacuum meter
Vacuum
percentage
0 0
0.2 20
0.3 30
0.4 40
0.5 50
0.6 60
0.7 70
0.8 80
0.9 90
- 1.0 99+
11. ON/OFF Switch
The ON/OFF switch is used to turn the machine on and off before and after operation. The switch turns on all units in the
machine. Caution, the switch does not completely remove all power from the machine.
OPERATION MODE
When the machine is turned on, the machine switches to operation mode after displaying the two codes (see page 4).
The operation mode is the standard setting of the control panel for packaging products. Set values cannot be modified in
operation mode.
With the PROG key and function selection keys the set values within the various programs can be viewed. If the
machine is ready to package a product (the product is already in the chamber), then all that needs to be done is to
choose the program (PROG key) and close the lid. The program cycle starts automatically running through the set
functions in the program.
Description of the program cycle for digital time control
1. Select the program number with the PROG key and the small display.
If the selected programme is programmed with the active gas flush function then a dot appears in the lower right hand corner of
the small display.
2. Close the lid.
3. Vacuum function The machine starts to vacuum the chamber.
The light in front of [VACUUM] goes on.
Large Display: decrementing time per second starting at the time set (max. 99 sec.).
Vacuum meter starts increasing to the left.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman POLAR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman POLAR in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman POLAR

Henkelman POLAR User Manual - German - 44 pages

Henkelman POLAR User Manual - Dutch - 43 pages

Henkelman POLAR User Manual - French - 46 pages

Henkelman POLAR User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info