647375
14
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 14
CONTROL PANEL LAYOUT
1. Small Display
Displays active program in operating and program modes.
2. Large Display
Displays the current value of the active function during the program cycle or the set value of the selected function in
operation or program mode.
3. PROG 0-9 Keys
Selects program number in operation or program mode.
4. REPROG Key
Switch from operation mode to program mode (for setting function values) and vice versa. After setting new function
value(s) within a selected program in program mode, this key must always be used to store the new values for the
program in memory.
5. FUNCTION SELECT Key
Selects function within selected program in operation and program mode. The function is selected if the function light is
on in front of the function description under the large display.
6. CONDITIONING PROGRAM Key
Start the conditioning program for pump (duration 15 minutes). For instructions on the program, see page 22.
7. FUNCTION Lights
A light in front of the function indicates that the function is active during the program cycle or that the function is selected
during the operation or program modes.
Special Remark There is an additional time operated vacuum function available at digital sensor control, the VACUUM
PLUS function. This function is not displayed on the panel. The VACUUM PLUS function can only be
activated if the standard vacuum function is set to 99%
VACUUM PLUS function display during the cycle (if activated) : The vacuum indicator light remains on
after 99% is reached and during the time set for VACUUM PLUS. During the VACUUM PLUS vacuum
cycle a dot appears in the right lower corner of the large display.
Display during operation and program mode : If the VACUUM PLUS time is activated during the
selected program then a dot appears in the lower right-hand corner of the large display during the
operation and program mode. If the functions are selected using the function selection keys then the
indicator light in front of VACUUM comes on twice, and the vacuum percentage and VACUUM PLUS
time are shown consecutively.
Special Remark If the machine has the gas flush function implemented and the function is activated within the selected
program then a dot appears in the lower right hand corner of the small display when selecting the
program no..
1 2
3
4
5
6
7
8
9
11
7
7
7
10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman POLAR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman POLAR in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman POLAR

Henkelman POLAR User Manual - German - 44 pages

Henkelman POLAR User Manual - Dutch - 43 pages

Henkelman POLAR User Manual - French - 46 pages

Henkelman POLAR User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info