647370
38
Zoom out
Zoom in
Previous page
1/48
Next page
38
Replace the lid gasket
The lid gasket ensures that the vacuum chamber is completely closed during the machine
cycle. This is essential for achieving a maximum vacuum. The lid gasket wears due to the
extreme pressure differences and must be replaced regularly. Inspect the lid gasket weekly
for tears or damage. Replace the lid gasket at least once every 6 months.
Remove the old gasket rubber from the holder.
Cut a new piece of rubber of the same size as the old one. When the lid rubber is too
short or too long it can cause problems closing the lid or leak.
Replace the new piece of gasket by pressing it into the lid. The lip of the gasket
should be pointing down and outwards.
The rubber must be placed evenly and without tension in the holder. The ends must
be cut straight and must be laid tightly against each other to avoid leakage.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman Lynx 42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman Lynx 42 in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman Lynx 42

Henkelman Lynx 42 User Manual - German - 56 pages

Henkelman Lynx 42 User Manual - Dutch - 50 pages

Henkelman Lynx 42 User Manual - French - 49 pages

Henkelman Lynx 42 User Manual - Spanish - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info