647370
36
Zoom out
Zoom in
Previous page
1/48
Next page
36
Replacing the sealing wire
Remove the seal bar from the machine by lifting it vertically up (1)
Remove the Teflon tape from the seal bar (2)
Remove the screws at the bottom of the sealing bar in order to remove the wires (3)
(4)
Remove the Teflon tape at top of the seal bar and stick a new piece of Teflon tape of
the same length after having degreased and cleaned the bar with a dust free cloth (5)
Cut a new piece of sealing wire or cut-off wire to the size of the sealing beam plus
about 15 cm (± 6 inches).
First attach one side of the wire at a side of the seal bar and screw it tight.
Now attach the other side of the wire at the other side of the seal bar. Pull the wire by
using a plier and tighten the screws at the same time (6). The sealing wires should be
tight and not protrude the plastic end blocks.
Cut the wire ends on both sides.
Cut a piece of Teflon tape as long as the seal bar plus about 5 cm (± 2 inches).
Ensure that the Teflon is stuck to the bar smoothly and without folds.
Cut the Teflon tape off such that the sticky part does not get stuck on the sides, but
only covers the top of the clamps (2).
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman Lynx 42 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman Lynx 42 in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman Lynx 42

Henkelman Lynx 42 User Manual - German - 56 pages

Henkelman Lynx 42 User Manual - Dutch - 50 pages

Henkelman Lynx 42 User Manual - French - 49 pages

Henkelman Lynx 42 User Manual - Spanish - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info