742458
80
Zoom out
Zoom in
Previous page
1/128
Next page
80
IT
zione orizzontale durante 24 ore perché il grasso
fluisca di nuovo al compressore.
Smaltire l’imballaggio in conformità con le dispo-
sizioni in vigore.
Pulire tutti gli elementi secondo le istruzioni (vedi
la sezione PULIZIA E MANUTENZIONE).
Mettere tutti i ripiani all’interno dell’apparecchio.
ATTENZIONE: A causa di residui di produzione, l’ap-
parecchio può emettere un odore sgradevole all’i-
nizio del funzionamento dell’apparecchio. Questo è
normale e non significa che il funzionamento non
corretto o pericolo. Assicurarsi che l’apparecchio è
ben ventilato.
Turn on the lighting switch, check the light is nor-
mal.
The digital temperature controller is delivered
with default parameters. Do not alter the para-
meters casually except for special need.
When running for the first time, it should run wi-
thout load for 2 hours to ensure the refrigeration
system is working normally. Only when the tem-
perature within the appliance is reduced within
the indicated scope can the food be put into the
appliance.
Don’t put too much food in the appliance to pre-
vent instantaneous high load. The food shall not
block the air outlet and air inlet. Nor shall it be
close to side glass. Otherwise it will lead to con-
densation.
To keep the taste of the food, please have the
equipment running 24 hours a day.
During the frosting process, the temperature of
the appliance may rise slightly. When the frosting
end, it will return to normal.
ATTENZIONE: Durante il trasporto, evitare di incli-
nare l’unità dalla verticale con un angolo superio-
re a 30 °. Se necessario, attendere circa 3-4 ore
prima di metterla in funzione affinché l’olio scorra
verso l’unità. In caso contrario, il condensatore
potrebbe venire danneggiato. Durante il traspor-
to, evitare di inclinare l’unità dalla verticale con un
angolo superiore a 30 °, In caso contrario, il con-
densatore potrebbe venire danneggiato.
Posizionamento
Per garantire un corretto funzionamento dell’appa-
recchio, si deve livellarlo. Il livellamento adeguato
riduce la vibrazione dell’aggregato funzionante.
Verificare la posizione corretta dell’apparecchio uti-
lizzando la livella.
NOTA!
Per consentire al refrigeratore o al congelatore il
funzionamento corretto, seguire le seguenti istru-
zioni:
Non posizionare l’apparecchio in un luogo espo-
sto alla luce solare diretta o vicino ad apparecchio
che emettono la radiazione come: lampade di ri-
scaldamento, stufe, radiatori ecc.
Evitare di integrare l’apparecchio.
Non mettere qualsiasi oggetto sulla parte supe-
riore dell’apparecchio in quanto vi è un aggregato.
Non posizionare l’apparecchio in una stanza con
un’umidità relativamente alta (l’acqua può con-
densare sull’involucro dell’apparecchio).
Non posizionare l’apparecchio in una stanza
stretta (l’aria non circola, l’apparecchio non fun-
ziona correttamente).
Non coprire le aperture di ventilazione nell’invo-
lucro dell’apparecchio.
Non posizionare gli apparecchi in modo che la
parte posteriore di un apparecchio si trovi presso
la parte posteriore di un altro apparecchio (gli ap-
parecchi non funzioneranno correttamente).
Assicurarsi che nel luogo in cui si trova l’apparec-
chio la ventilazione è sufficiente, anche fuori orari
di lavoro, è essenziale per il corretto funzionamento
dell’aggregato.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi Saladette met verhoogde vitrine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi Saladette met verhoogde vitrine in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info