Manual Hendi 282274 (page 14 of 164) (English, German, Dutch, French, Italian, Polish)

741096

Zoom out

Zoom in

1/164

Unblock in case of obstacle

During the working, or during the Archimedean

screw rotation, due to the food products introduc-

tion with not homogeneous parts, as for example

bones, or other, the machine could block.

The same situation can determine after an electric

feeding break, or when the machine is stopped with

inside the food product.

To be able to resume normally the working, the

grinding group must be disassembled, with the

different differentiation: the disassembly must not

happen slacking the blockage wheel, but slacking

the grinding mouth block knob.

4. Maintenance, breaks research and cleaning

4.1. Maintenance man requirements

With the term “maintenance” must not be under-

stood only the periodical check of the machine

normal functioning but also the analysis and the

consequent remedy of all causes that for any mat-

ter put it out of service. It is absolutely necessary

that for the maintenance, cleaning, parts change

and breaks research activities performed from the

user, this work is entrusted to skilled personnel,

competence and authorized from the employer.

All operations of maintenance, cleaning and parts

change, none excluded, must be deﬁnitely per-

formed with the machine completely stopped and

insulated from the external feeding sources.

4.2. Maintenance prescriptions

Protections removal and/or protection devices

For any interventions described in the present

chapter, it is necessary to remove from their posi-

tion some ﬁxed protections.

The removal can happen only from the mainte-

nance man.

At the end of the interventions, these protections

must be replaced and blocked in their original po-

sition, with the fastening systems which were fore-

seen before the intervention.

The maintenance responsible must disconnect

completely the machine, as here follow reported,

before to proceed with the removal of a ﬁxed pro-

tection and/or with the element change.

4.3. Insulation from the external feeding sources

Before to perform any operation of maintenance,

cleaning and parts change, the external feeding

sources must be sectioned and insulated.

Position on “zero” the protection device placed

upstream of the electric equipment feeding line.

Disconnect the general sectioning device and pro-

vide to protect the plug with proper systems

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 282274 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 282274 Manual

Product: