Manual Hendi 282274 (page 12 of 164) (English, German, Dutch, French, Italian, Polish)

741096

Zoom out

Zoom in

1/164

3.7. Functioning description

The control devices are designed and manufac-

tured so as much sure and reliable and resistant

to the service normal stresses, to the foreseeable

strains and to the external agents. Besides they

are clearly visible, locatable and marked from a

suitable marking. Here follow the main control

devices are showed:

TYPE / COLOR REFERENCE / DESCRIPTION

button / black “0” / button for the machine stop control

button / white “I” / button for the machine start control

Starting

The machine starting is possible only with a vol-

untary action on the control device foreseen for

this aim: white button “I” for the machine starting

control.

Stop

For the stop control push the black button “0”. In

case of momentary or extended stop, before to get

in function the machine, all food products must be

removed within the machine: follow the indications

relative to the grinding group disassembly.

Functioning safety

If the machine is under stress, or is submitted to

too long functioning times or submitted at over-

loaded, the same stops immediately for the ther-

mal protection functioning. In this case wait that

it is completely cooled before proceeding to the

starting function.

Voltage lacking

In case of electric feeding breaking or if the ma-

chine is disconnected from the electric net, this

last one will be able to be restarted only following

the starting function, after the electric feeding

back or the reconnection to the electric net.

3.8. Controls and verifications before starting

VERIFICATION / CONTROL BEFORE THE STARTING MODALITY AND CHECKS

Check that:

Extraneous objects aren’t on the machine, inside the

hopper, inside the machine neck

Sight control of the indicated parts, to check of objects

or extraneous bodies lacking as for example different

tools, clothes, etc… and that there isn’t however the food

product.

In case of presence, provide with their removal.

Check the cleaning:

• of the machine neck internal parts and of the

grinding group

• of the pusher

• of the machine external surface

All indicated parts surfaces, before the machine use

must be checked visually to verify their cleaning.

For the sight check of the grinding group internal parts,

provide with its disassembly.

In case of molds presence or other type of dirtiness, pro

vide with the cleaning procedure in accordance with the

chapter 5 indications

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 282274 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 282274 Manual

Product: