Manual Hendi 282007 (page 9 of 164) (English, German, Dutch, French, Italian, Polish)

741094

Zoom out

Zoom in

1/164

3.1. Working positions and operators tasks

As described in the instructions manual for the

use, the machine is designed to be driven from

an operator skilled and informed on the residual

risks, but with the competences, in safety matter,

of the maintenance employees.

The normal working zone of the operator is:

• The machine lateral zone near the hopper (de-

ﬁned loading zone) in normal conditions of

functioning for the food product manual loading

operations in the hopper and during the pestle

use to direct the food product inside the machine

neck, with the ﬁxed protections in closed and

blocked position;

• The machine anterior zone near the food product

unloading zone in normal conditions functioning

for the food product manual drawing operations

stored in a proper container, with the ﬁxed pro-

tections in closed and blocked position

3.2. Packing removal – opening modality

All transportation and handling operations must

be performed from informed and trained person-

nel and must have read and understood the safety

prescriptions showed in the present instructions

manual for the use. Occur:

• Perform the machine handling and transporta-

tion always when you find it uncharged;

• Verify that the lifting means are able to

support the loading weight and overall di-

mensions in safety conditions and that are

approved and subjected to a regular mainte-

nance,

• Adopt all necessary measures to assure the

means and loads maximum stability in relation

to their masses and barycentre,

• Avoid to make suffer to the machine rude shak-

er or accidental collisions during the moving

and the loading,

• Perform the handling with continue move-

ments, without pulls or repeated impulses.

3.3. Packing removal – opening modality

Packing decription – how get rid of the packing material

The machines are packaged so that the seepage /

liquids insight, organic matters or alive beings is

avoided: it is represented from a covering in poly-

ethylene around the machine, and all inserted in a

cardboard box of adequate size. The empty spaces

within the box are occupied from the fill material.

Don’t waste the packaging in the environment, but

restore it for possible transportations or to address

it to the recycling agencies.

The evaluation and the management with the aims

of the biological compatibility of the products used

in the packaging, are of the user competence and

responsibility.

It is an employer obligation to be acquainted of the

actual laws in own country and work so that to

observe these legislations.

It is forbidden and besides liable to fines, leave

the machine and the electric equipment in the en-

vironment.

3.4. Preparation preliminary operations stability

The machine stability is designed so that, in the

foreseen functioning conditions, taking into ac-

count of the climatic conditions, is such as to allow

the use without reversal risk, fall, or inopportune

movement.

Taking into account of the conformation and its po-

sition, the machine results to be intrinsically steady

without fastening needs to the working ground.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 282007 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 282007 Manual

Product: