Manual Hendi 272701 (page 7 of 144) (English, German, Dutch, French, Italian, Polish)

742603

Zoom out

Zoom in

1/144

Optional base stand

Base stand assembly parts: 6pcs bolts M5 x 10 and

6pcs washers for base stands and base.

Attach 3pcs stands to the base.

Buy suitable hook bolts or rawlbolts from your lo-

cal market to insert them into the ground or ﬂoor

through base stand holes for this appliance stabil-

ity. (See Figure 3)

Fig. 3

Optional wheels

Wheels assembly parts: 2pcs bolts, 4pcs washers

and 2pcs nuts for wheels assembly.

Collect wheels parts together and ﬁx wheels to the

base. (See Figure 4)

Fig. 4

Operating instructions

Before first use and after every gas cylinder change, gas delivery system must be purged of air before ig-

niting! To do this, turn the control knob counter-clockwise to the pilot setting. Press knob in and hold for 3

minutes before attempting ignition.

To light the pilot

• Check all connections prior to each use.

• Turn on main gas supply.

• Press to turn control knob counter-clockwise to

PILOT, see right photo.

• Hold knob depressed, press IGNITION button re-

peatedly until pilot ﬂame is lit, then continue to

hold the knob depressed for 10 seconds until the

pilot remains it after releasing knob.

• If pilot fails to ignite or alight, press to turn knob

clockwise to OFF and repeat.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 272701 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 272701 Manual

Product: