Manual Hendi 272701 (page 6 of 144) (English, German, Dutch, French, Italian, Polish)

742603

Zoom out

Zoom in

1/144

Patio heater assembly

Assembly instructions

• Screwdriver / Adjustable Spanners / Wrenches

• Leak Detection Solution one part detergent and

three parts water

• Before assembly, make sure all protection pack-

ing material must be moved.

• Assembling all nuts and bolts loosely at ﬁrst.

Tighten all connections after completion of as-

sembly. This eases your work and increase the

stability of your appliance.

• Small deviations in equipment may occur. This is

no lack of quality but subject to improvements.

SETP 1: Screw rear panel of housing to the base

with 5pcs bolts M5 x 12 and 5pcs washer.

(Detail Abb. A)

SETP 2: Push the housing lid over rear panel of

housing and place onto rear panel of

housing. Screw together the housing lid

and rear panel of housing with 5pcs bolts

M5x12 and 5pcs washers. (Detail Abb. B)

SETP 3: Fix the post assembly upwards onto the

housing lid with 4pcs bolts M6 x 12 and

4pcs washers, then put plastic cover

through the post. (Detail Abb. D-2)Connect

the post assembly with 3pcs M5x12 screw

and 3pcs ﬂat washer. (Detail Abb. D-1)

SETP 4: Fix one piece reﬂector to the central dome

with 1pc bolt M6*8, 1pcs cap screw, 1pcs

ﬂat washer ﬁrstly. (Detail Abb. E-1).Con-

nect the second reﬂector part to the ﬁrst

one and central dome with 3pc bolt M6x8,

3pcs cap screw, 3pcs ﬂat washer later.

(Detail Abb. E-2). Fix the third reﬂector

part with 5pc bolt M6x8, 5pcs cap screw,

5pcs ﬂat washer at last. (Detail Abb. E-3)

SETP 5: Tighten inner gas pipe to main burner (See

Figure 1), Then ﬁx main burner to the post

with 3 bolts M5x12 and 3pcs washers. (De-

tail Abb. F)

NOTE: DO NOT OVER TIGHTEN! REFER TO

LEAK TESTING ON PAGE 5.

SETP 6: Fix the door to housing. (See Figure 2 and

Detail Abb. F)

D-1

D-2

13+20

14+15+21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 272701 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 272701 Manual

Product: