741265

Hendi 240410 Manual

6
Zoom out
Zoom in
Previous page
1/88
Next page
6
EN
Precautions
• The appliance does not function if the pan is not
in the cooker.
• Always keep the bottom of the pan clean and dry.
Any res- idues between the bottom of the pan and
the heater will cause the cooker to malfunction.
• Do not attempt to press the switch by force if the
switch button cannot be pressed in the cooking
position. The switch normally remains in that po-
sition when the pan is not in the cooker or just
after cooking has been com- pleted.
• The appliance should be placed on a stable sur-
face. Do not expose to water, steam or direct heat.
• Do not cover the lid with anything when the rice
cooker is in use.
• Do not use the pan directly on open fire.
• Do not immerse the cooker in water and avoid
putting the cooker near fire.
• Hendi supplies this cooker with an additional
burnt proof griddle that should be put at the bot-
tom of the pan and avoids sticking of rice.
How to cook rice
1. Measure rice with the measuring cup.
• Wash rice in another bowl until water is rel-
atively clear. Bran may give an uppleasant
odour to cooked rice. Wash rice thoroughly and
quickly to effectively remove the bran.
2. Caution! Do not fill rice and water over the 10
cups (or 1.8L) that marked in the inner pan to
avoid spillage.
Note: The markings represent the amount of
water to be added in relation to the amount of
cups rice to be cooked. E.g. If you add 10 cups
(or 1.8L) of rice in the inner pan, fill water until
the marking “10”. For more or less rice, fill water
according to the markings into the inner pan.
3. Wipe dry & place the pan in the rice cooker. En-
sure the pan is directly in contact with the heat-
ing plate by turning it slightly form the right to
the left until it fits properly.
• Wipe dry the outside of the pan before use. A
wet pan may cause cracking noise while cook-
ing and may damage the unit.
4. Close the lid until it clicks. If
the lid is not closed securely
the cooking result will be
effected.
5. Attach the power cord
to the cooker and then
connect it to the power
supply. Press down the
switch. The red ‘Cooking’ light will light to indi-
cate the start of the cooking process.
6. When the rice is ready, the switch will pop up.
‘The Keep Warm’ indicator will light up to indi-
cate that the ‘Keep Warm function’ has started.
7. After the switch button
pops up: leave the lid
for at least 15 minutes
on the appliance to
steam the rice. The rice
will be fluffier.
8. Press the button for opening the lid and then
open the lid.
9. Scoop and mix the rice well with the supplied
scoop or a wooden or plastic scoop. Do not use
metal scoop.
10. After taking some rice, close the lid and keep
the rice warm. If you want the rice to cool down
a little, open the lid and unplug the power cord
from the power outlet to leave the rice for cool-
ing in the inner pan.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 240410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 240410 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info