741208
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
EN
5). If the appliance beeps after being switched on,
the pan you are using is not suitable for induc-
tion or the appliance is defective. In case of any
doubt, always contact the supplier of your pan!
Error codes display
Error codes shown on the display (1) Possible cause Possible solution
E01 The temperature of the appliance is too high Unplug the appliance, remove
the cookware, wait until the ap-
pliance is completely cool down.
Cooling fan defective Contact the supplier.
E02 The temperature of the cookware is too high.
Possibly, the cookware becomes empty and
appliance will shut down for protection.
Unplug the appliance, remove
the cookware, wait until the ap-
pliance is completely cool down.
E03 The supply voltage is abnormal. (Supply volt-
age is too high or too low)
Make sure that the appliance is
connected to a suitable electri-
cal power supply.
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning and storage.
Cleaning
Never immerse the appliance in water or other
liquids.
Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Storage
Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
Store the appliance in a cool, clean and dry place.
Never put heavy objects on the heating surface
during storage as it may crack it.
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
Error codes shown on the digital display (1). (See
--> Error codes display)
Problems Possible cause Possible solution
The appliance does not switch ON.
- Power plug is not connected proper-
ly with the electrical outlet.
- Without switch ON the appliance by
turn ON the knob.
- Check the power plug to make sure
it is connected properly.
- Switch ON the appliance by turning
ON the knob.
Cooling fan is operating even after the
appliance is switched to OFF mode.
- This is normal. The cooling fan con-
tinues running in Standby mode for
some time to cool down all internal
elements.
- Wait until the cooling fan stops ro-
tating.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 239780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239780 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info