741221
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
EN
Error codes display
Error codes shown on the display Possible cause Possible solution
E 1 The temperature of the appliance is
too high
Clear all obstacles that around the
appliance. Unplug the appliance, re-
move the pan or pot, wait until the ap-
pliance is completely cool down.
E 2 The temperature sensor is damaged. Contact the supplier.
E 3 Input supply voltage is too high or too
low.
Make sure that the appliance is con-
nected to a suitable electrical power
supply.
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning & storage.
Cleaning
Never immerse the appliance in water or other
liquids.
Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Storage
Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
Store the appliance in a cool, clean and dry place.
Never put objects on the heating surface as it
may crack the surface.
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problems Possible cause Possible solution
The appliance does not switch on. - Power plug is not connected proper-
ly with the electrical outlet.
- Knob is not rotated.
- Check the power plug to make sure
it is connected properly.
- Rotate the knob to switch on the
appliance.
Cooling fan is operating even after the
appliance is switched off
- This is normal. The cooling fan con-
tinues running for some time to cool
down all internal elements.
- Wait until the cooling fan stops op-
erating.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 239384 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239384 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info