Manual Hendi 233856 (page 8 of 96) (English, German, Dutch, French, Italian, Polish)

742336

Zoom out

Zoom in

1/96

Cleaning & Maintenance

Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely before

cleaning or doing repair or maintenance work. And this should be performed by qualiﬁed and authorized

technician only.

Cleaning

• Clean the appliance regularly.

• The exterior and interior surfaces can be cleaned

with a damp cloth and some mild cleaning agent.

• Do not use water jet or steam cleaner for clean-

ing and do not immerse the appliance under the

water.

•

After the cleaning procedure, you should use a soft

and dry cloth to wipe the surface dry thoroughly.

• Never use hot water for cleaning the appliance.

• Never use aggressive or coarse cleaning agents

such as sourcing powder, alcohol, solvents or

other substances that could damage the appli-

ance’s surfaces.

• If not in use for a long period of time, left the

freezer open to avoid accumulation of unpleasant

smell inside.

Defrosting

• Defrost the freezer when the frost layer reaches

a thickness of about 10-15mm.

• The best time to defrost the freezer when it con-

tains no or only little food.

• To remove the frost, do these steps:

1. Set te temperature regulator to the “0” posi-

tion and unplug the freezer.

2. Remove any stored food, wrap it in several lay-

ers of newspaper and put it in a cool place.

3. Leave the lid open, remove the stopper in-

side the interior cabinet (3) and unscrew

anti-clockwise the cover of the drain hole

(8). Collect all defrost water on a tray. Use a

scraper to remove the ice quickly.

4. When defrosting is completed, dry the interior

thoroughly and reﬁt the stopper.

5. Plug in again and set the temperature regula-

tor to obtain the maximum coldness and run

the appliance for two or three hours using this

setting.

6. Reload the previously removed food into the

cabinet compartment.

Important!

• Never use sharp metal tools to scrape off frost

as you could damage the appliance. Do not use

a mechanical device or any artiﬁcial means to

speed up the thawing process other than those

recommended by the manufacturer.

• The amount of frost on the walls of the appliance

will be increased due to high level of humidity

from external environment or the frozen food is

not wrapped properly.

Maintenance

• Only a qualiﬁed technician and original spare

parts and accessories should be used to carry

out the repair and maintenance work. DO NOT

attempt to repair the appliance yourself.

Replacement of lamp

• Unplug the appliance from the main supply.

• Take out the lamp cover by loosing 2 screws.

• Unscrew the lamp bulb and replace with a new

one.

• Replace the cover.

Speciﬁcation of the lamp:

220-240V~ max. 2W, E14 cap

Note: Do not use a lamp more than 2W.

Screw driver (not supplied)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 233856 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 233856 Manual

Product: