Manual Hendi 233856 (page 6 of 96) (English, German, Dutch, French, Italian, Polish)

742336

Zoom out

Zoom in

1/96

Control panel of the appliance

°C

Temperature

regulator dial

Digital Temperature

Display

A. Temperature Regulator

The temperature can be adjusted by rotating this

knob in the range of setting 1 to 7.

Setting 0: At “Stop” mode, not operate.

Setting 1: Warmest temperature

(- 20°C to -18°C)

Setting 7: Coldest temperature (- 26°C to - 24°C)

Note: The setting temperature will be affected

by the below factor:

• Ambient temperature and humidity of the ap-

pliance

• Quantity of the stored food item

• Frequency of opening the lid

We recommend to place the food at the middle

position.

B. Digital temperature display

It shows the current temperature inside the ap-

pliance.

Note: Green dot light ON to indicate the com-

pressor is working.

Installation of the appliance

Attention: Any installation, maintenance and repair work should be performed by qualiﬁed and authorized

technician only.

• Check to make sure that the appliance is un-

damaged or complete delivery (basket and drain

stopper are included). In case of any damage or

incomplete delivery, DO NOT use the appliance

and contact the supplier immediately.

• Remove all packing material and protective ﬁlm

(if applicable).

• Let the appliance stand still for at least 3 hours

after installation before putting the appliance into

operation, this is to allow the cooling agent to lev-

el off for optimum efﬁciency.

• Place the appliance on a dry, level, steady and

safe ﬂoor away from any heat source. Recom-

mend to place in an air-conditioned room.

• Avoid expose to direct sunlight or direct source of

heat such as cooker, heater, stoves, etc.

• Make sure that a minimum of 20 cm distance is

kept around all sides of the appliance for ventila-

tion purposes.

• Place the appliance in such a way that the plug

is easily accessible and can be quickly removed

from its socket in case of necessity.

• Due to heavy weight of the appliance, it should be

installed and moved by at least 2 persons.

• The inclined angle of the cabinet should not be

over 45° during transportation.

Installation of lid handle

• Get the lid handle, screws and handle cover in-

side the appliance.

• Place the lid handle on the front side of the lid,

aligning the screw holes. Fasten them securely.

• Then, place the handle cover to cover the screws,

bending it slightly and ﬁxing it ﬂat onto the lid

handle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 233856 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 233856 Manual

Product: