741098

Hendi 232717 Manual

10
Zoom out
Zoom in
Previous page
1/164
Next page
10
EN
Electric Feeding
The electric feeding connection must be in conform-
ance with the country legislation in which is used.
The electric feeding so must be maintained in
conformance with the following technical prescrip-
tions:
• The electric feeding must be always of type and
have an intensity corresponding to the specifica-
tions indicated in the machine plate. If excessive
voltages are applied, some components will be
damaged irreparably,
• A differential device must be foreseen coordi-
nated with the protection circuit, respecting the
legislation, the legislative and regulated dispos-
als in force in the installation country;
• The electric feeding cable outside the machine
cover must be made pass in the spaces pre-
pared from You and adequately protected;
• If present the neutral conductor (N) before
feeding the electric equipment, as for You its
continuity must be guaranteed (connected and
available).
• Before to feed the electric equipment, as for You
must be guaranteed the continuity of the green
yellow conductor of the protection equipotential
circuit.
Electric feeding sectioning device
The feeding sectioning device, as comparable from
what described in the power circuits diagram de-
livered with the electric equipment, is supplied for
the machine feeding unique source.
In case of incompatibility between the net socket
and the device plug change the socket with another
type suitable from maintenance personnel.
The feeding sectioning device allows to separate
(insulate) the machine electric equipment from
the feeding, with the aim to make possible the
interventions performing without electric shocks
risks.
The sectioning device presents two possible posi-
tions:
OFF o “disconnected”, the electric equipment results
sectioned from the electric feeding
ON o “connected”, the electric equipment results
connected to the electric feeding
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 232717 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232717 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info