Manual Hendi 232717 (page 8 of 164) (English, German, Dutch, French, Italian, Polish)

741098

Zoom out

Zoom in

1/164

• the use of plates with holes diameter bigger

than 8mm is forbidden.

The user is however responsible of the damages

resulting from the lacked observance of the spec-

ified normal use conditions. For possible doubts

you can enquire at the Authorized Assistance

Center.

2. Safety instructions

2.1.

Warnings on the residual risks

RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN PARTS

For any evenience the operator must not try

to open or remove a fixed protection or tamper

a safety device.

In the phase of equipment, maintenance and

cleaning, and during all further manual opera-

tions that happens introducing the hands or other

body parts in the machine dangerous areas, a re-

sidual risk remains due above all to:

• Knocks with machine manufacturing parts,

• Grazing and/or abrasion with machine rough

parts,

• Cut with tools sharpened parts.

Besides, the operator and the maintenance man

must be skilled for the intervention connected

to the manual operations with open protections,

must be trained on the joined consequent risks

and must be authorized from a responsible per-

son.

2.2. Protection devices on the machine

The machine protections and safety devices must

not be removed.

If they must be removed for extraordinary mainte-

nance requirements some measures will have to

be immediately adopted ready to put in evidence

and to reduce at the possible minimum limit the

danger.

The putting back in its place of the protection or

of the safety device must happen as soon as the

reasons, that have made necessary their tempo-

rary removal, are stopped.

The machine transmission parts are completely

isolated by means of ﬁxed protections which don’t

allow the access for none kinematical chain.

Taking into account of the machine use modality

and its use destination, the moving elements aren’t

isolated from ﬁxed protections, moving protections

or other safety devices.

The grinding group parts result placed at some dis-

tances from the access points such for which some

dangerous points aren’t reachable.

For all safety functions including the control and

check systems parts joined to the safety, some

well-tested components and safety principles have

been used.

3. Transportation, put on service and use

The machine management is allowed only to the

authorized personnel and opportunely educated

and endowed of a sufficient technical experience.

Before to switch on the machine perform the fol-

lowing operations:

• Read with attention the technical documenta-

tion,

• Know what protections and emergency devic-

es are available on the machine, their location

and functioning.

The not authorized use of commercial parts and

accessories making part of the protections and

safety devices can cause some malfunctions and

the ranger situation beginning for the operators.

The operator must besides have received an ad-

equate training.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232717 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 232717 Manual

Product: