742364

Hendi 232194 Manual

9
Zoom out
Zoom in
Previous page
1/176
Next page
9
EN
be required to chill in advance the chamber before
starting the positive or negative processes.
For regulating the functioning parameters consult
the instructions for the instrument panel enclosed
to the current manual.
5. Cleaning
All the procedures must be carried out with the sta-
tionary unit removing the tension from both the re-
frigerated item and the condensing unit.
Cleaning of the blast chiller
The maintenance of the blast chiller must include at
least one daily cleaning of the loading zone, in order
to prevent the development and the accumulation of
bacteria.
Before cleaning the blast chiller room, carrying out
the defrosting keeping the door open and removing
the lid of the drainage pipe.
ATTENTION!
It is essential to keep daily clean the blast chiller in
order to prevent the development and the accumu-
lation of bacteria. Before cleaning the chamber of
the blast chiller, you must execute a defrosting pro-
cess, by removing the lid of the drainage basin.
• Do not flush directly the inner parts of the blast
chiller because the electrical parts could get
damaged.
• Do not use any hard metal tools to remove the
ice.
• For the cleaning use only warm water (not hot)
with no-aggressive detergents, taking care of
drying the wet parts with a soft cloth.
• Avoid to use products that contain chlorine or di-
luted solutions, caustic soda, abrasive deter-
gents, muriatic acid, vinegar, bleach or other
products that might scratch or grind.
• We recommend to clean the device at least once
a month, when it used for deep-frozen products.
Attention, during the cleaning operations
it is recommended to use work gloves.
Cleaning the probe
The maintenance of the blast chiller must include
at least one daily cleaning of the temperature core
probe.
It is essential to keep daily clean the blast chiller
room probe. All the procedures must be carried out
with the stationary unit removing the tension from
both the refrigerated item and the condensing unit.
We recommend to rinse carefully the probe with
clean water and with hygienized solution. Refer to
the same methods and detergents for cleaning
named in the previous paragraph.
6. Recommendations and warnings
We recommend to make a daily cleaning of the ex-
ternal part of the blast chiller, including the internal
side of the door near the gaskets.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 232194 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 232194 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 20,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info