Manual Hendi 230442 (page 8 of 144) (English, German, Dutch, French, Italian, Polish)

742508

Zoom out

Zoom in

1/144

BRINE REFILL The device is in the position of fourth operation cycle - ﬁlling the salt tank with

water in order to prepare the solution of brine for the next regeneration. The level

of brine (water in the salt tank) is regulated by the time of ﬁlling water. The longer

the time, the more salt dissolves in the water. In this cycle the controller shuts off

water inlet to the water system. Thanks to this, the controller protects the water

system against the penetration of impurities from rinsing.

FAST RINSE

The device is in the position of ﬁfth operation cycle - fast rinsing of the resin to remove any

remaining of brine, setting of the ﬁlter bed. Water, after ﬂowing through the resin, is directed

upwards through a central pipe and further to the release to sewage. In this cycle the

controller shuts off water inlet to the water system. Thanks to this, the controller protects the

water system against the penetration of impurities from rinsing.

Diagram of operating cycles of the device for 230442 model

Start

Service status

Slow rinse

status

Up-flow regeneration

Brine draw status

Backwash status

Brine refill status

Fast rinse status

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 230442 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 230442 Manual

Product: