Manual Hendi 230442 (page 4 of 144) (English, German, Dutch, French, Italian, Polish)

742508

Zoom out

Zoom in

1/144

• Never use accessories other than those recommended by the manufacturer. Failure to do

so could pose a safety risk to the user and could damage the appliance. Only use original

parts and accessories.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge.

• This appliance must not be used by children under any circumstances.

• Keep the appliance and its cord out of reach of children.

• Always disconnect the appliance from the mains if it is left unattended or is not in use,

and before assembly, disassembly or cleaning.

• Never leave the appliance unattended during use.

How your water softener works

Hard water ﬂows to your household with a mains

pipe. It reaches the softener and ﬂows through a

deposit of ion exchange resin which softens water.

At that time ion exchange process occurs, in the

course of which calcium and magnesium ions re-

sponsible for the hardness of water are captured by

the ion exchange resin and replaced with sodium

ions that dissolve well in water. Successively, sof-

tened water is delivered to the installation system

in your household.

A device programmed individually for your wa-

ter measures the quantity of water which ﬂows

through. As soon as the exchange capacity of the

resin is reached, the device automatically (230459)

or semi-automatically (230442) carries out re-

generation of the resin with pre-prepared brine

(salt dissolved in water, stored in a brine tank). In

the course of regeneration, the device will draw a

programmed quantity of brine to the tank with ion

exchange resin. As a result, reverse-cycle ion ex-

change will occur.

The ion exchange resin will be “charged” with

sodium ions from salt, as well as will release the

previously captured ions of calcium and magne-

sium that, together with the rest of brine, will be

drained to sewage. After the regeneration process

is done, the device regains its ion exchange capa-

bilities and can soften water further. The process

of ion exchange allows to utilize the water softener

for a long period, whereas the regeneration of ion

exchange resin can be done multiple times, thanks

to which the expensive resin does not have to be

replaced. The only thing to be done is to reﬁll salt

in the tank.

Contents

Description Quantity

Softener body 1 unit

100 - 240 VAC voltage transformer 1 unit

2.5” wrench for the head ﬂange 1 pc.

3/4” connector 2 pcs

3/4” seal 2 pcs

Worm drive hose clip 1 pc.

Non-collapsible hose 1 running metre

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 230442 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 230442 Manual

Product: