741086
9
Zoom out
Zoom in
Previous page
1/20
Next page
9
EN
6.2. LUBRIFICATION OF SHAFTS AND ROLLERS
It is necessary to grease shafts and rollers every
year. Take the protection, the slanted wall, the
springs and the dough-scrapers off; unscrew the fix-
ing screws and take off first the back-panel and then
the stands; take off the rollers and the joints. Clean
all these parts accurately by means of a sponge,
warm water and food detergent, rinse thoroughly
and dry it with absorbing paper. Grease both the
shafts and the back on and fix all the parts, starting
from the last taken-off piece.
6.3. POSSIBLES ANOMALIES
Malfunctioning Cause Solution
The equipment does not run Lack of electric power supply Check the user’s electrical system
The foot pedal is connected to
the equipment
Step the foot pedal
CHAPTER 7. EQUIPMENT DISPOSAL
Actuation of the directives 2002/95/CE, 2002/96/CE and 2003/108/CE, about the dangerous substances
use reduction in the electric and electronic equipment, as well as the refuse selling.
The barred garbage symbol included on the machine
shows the needs that the machinery at the end of its
useful life is sold in appropriate centers. The pre-
sent machine rubbish collection at the end of its life
is organized and managed from the producer. The
user that will be able to get rid of the present machi-
ne will have so to contact the producer and follow the
new adopted system to allow the equipment rubbish
collection reached at the life end. The adequate rub-
bish collection for the equipment successive star-
ting dismissed to the recycling, to the treatment and
to the environmentally compatible selling contribu-
tes to prevent possible negative effects on the
environment and on the health and favors the reuse
and/or material recycling of the equipment.
In the machine dangerous substances are not pre-
sent.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 226599 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 226599 in the language / languages: English, Polish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info