741085
6
Zoom out
Zoom in
Previous page
1/17
Next page
01 WARNINGS
01.01 Safety principle e cautions for a safety work
1. Before turning on the machine, and every time a doubt about its workings
should arise, every operator is obliged to carefully read the instructions for
use. Remember: using a machine you run a risk. Ensure that the people con-
cerned know and adhere to the contents of the manual.
2. Use the Machine indoor only.
3. Be careful, before start every work.
4. Work only with all safety and protective devices expected present and effi-
cient. Avoid to draw the hands near the moving parts.
5. It is absolutely forbidden to neutralise, remove, modify or in any other way
render inefficient, any part of the safety devices, protective devices, or con-
trols of the machine, wherever positioned. All the protective and safety devic-
es must be kept in perfect condition and working order.
6. Before turning on the machine, be sure that nobody is in the risk area.
7. During work cycle, operator must stand out the risk area.
8. During work cycle, do not leave the machine unattended.
9. Never work different materials, as quantity, quality and type, from how de-
script at point 02.01.
10. It is absolutely forbidden use the machine differently from how descript at
point 02.01.
11. Stop the Machine before cleaning an before removing any safety and protec-
tive device for maintenance.
12. During phases of research or removal of any cause of damage or inconven-
ience concerning the machine, take all necessary measures to prevent any
damage to people or things. remove the electric tension (separation of the
machine from the electric network) before approaching the protective devices.
13. At the end of any intervention that requires the removal or the neutralisation of
any component correlated to safety (barriers, sensors, protections, etc.), carry
out the putting back into operation, ensuring the correct position and effec-
tiveness.
14. Do not let unauthorized and unqualified personnel start, set and repair the
machine. Refer to this manual for the right operations.
15. The user power-supply main line should be equipped with safety devices by a
differential switch, automatically disconnecting, above the Machine, and with
an earth installation suitable for accident prevention standard.
16. Control main switches or nearly when the machine is turned off and un-
plugged. Authorized and qualified personnel only, must execute controls and
maintenance activities that need to remove of safety devices.
17. Pay attention to the indication of the identification plates existing on the ma-
chine.
18. All the identification plates, present, must be legible.
19. If machine does not work or components are damaged, contact the mainte-
nance-man, without proceed in further repairs.
20. Do not repair the machine hastily or incompletely. This can compromise the
good work of the machine.
21. Do not tamper the machine. The manufacturer disclaims all responsibility and
make the user liable toward accident prevention competent body.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 226308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 226308 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hendi 226308

Hendi 226308 User Manual - German - 15 pages

Hendi 226308 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info