Manual Hendi 225523 (page 8 of 128) (English, German, Dutch, French, Italian, Polish)

741836

Zoom out

Zoom in

1/128

Fig. 1 Fig. 2

5.6 CONNECTING THE POWER CABLE

To access the terminal board, just remove the ap-

pliance’s rear sidepanel. Loosen the cable gripper

and allow the cable to pass through it. Arrange the

conductors so that the earth conductor is the last

to detach from its terminal if the cable goes into

a state of faulty traction. Connect the phase con-

ductors to the terminals marked “L1” and “L2”,

connecting the neutral conductor to the terminal

marked “N” and the earth conductor to the ter-

minal marked with the symbol

according to the

following lay-out:

230V

L2 L1 N

400V / 2N

L2 L1

(this electrical connection lay-out is located near

the power supply terminal board). Tighten the ca-

ble gripper and re-ﬁ t the rear side-panel of the

appliance.

The appliance must be connected to an equipoten-

tial system whose efﬁ ciency must ﬁ rst be checked

according to current legal regulations.

This connection must be made between different ap-

pliances by using the appropriate terminal marked

with the symbol . The equipotential conductor

must have a minimum diameter of 2,5 mm². The

equipotential terminal is at the rear of the appliance.

5.7 SAFETY THERMAL BREAKER

The appliance has a manually reset safety thermal

breaker. It protects against excessive dangerous

over-temperatures which could be accidentally

generated inside the appliance. This device is lo-

cated on the back of the oven.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 225523 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 225523 Manual

Product: