Manual Hendi 225516 (page 9 of 96) (English, German, Dutch, French, Italian, Polish)

741837

Zoom out

Zoom in

1/96

10. ROUTINE CLEANING AND MAINTENANCE

(WARNING: Cut power to the appliance before every operation)

General cleaning

Clean the oven when it is cold. Wash enamelled

parts with lukewarm water and soap, do not use

abrasive products, steel wool, or acids, which could

ruin them. To clean the steel parts, do not use

products containing chlorine (sodium hypochlorite,

hydrochloric acid, etc) even if diluted. Use speciﬁ c

off-the-shelf products or a little hot vinegar. Rinse

thoroughly with water and dry with a soft cloth.

Clean the glass door of the oven with hot water only,

and do not use rough cloths. Do not allow foods (es-

pecially acid foods such as salt, vinegar, lemon, etc)

to stagnate on the stainless steel parts, because

they could deteriorate. Do not wash the appliance

with direct jets of water, because if water enters,

this could limit the appliance’s safety. Do not use

corrosive substances (e.g. hydrochloric acid) to

clean the oven’ s support bench.

Cleaning the oven

It is good practice to clean the oven interior at the

end of every day of duty. In this way it will be easier

to remove cooking residues, preventing them from

burning when the oven is next used. Clean it accu-

rately with hot water and soap or with the appropri-

ate off-theshelf products.

Cleaning the oven door

To clean the oven door thoroughly, proceed as

follows:

• fully open the door;

• insert the equipped plugs in the “A” holes on the

hinges (Fig. 4);

• lift the door gently and withdraw it (Fig. 5);

• put back the door in the initial position by operat-

ing

inverserly.

Replacing oven lamp

Electrically switch off the appliance; unscrew the

protective glass cap; unscrew the lamp and replace

it with another lamp suitable for high temperatures

(300°C), with the following characteristics:

• Voltage 230/240 V

• Power 15 W

• Fitting E 14

Reﬁ t the glass cap and power up the appliance.

Fig. 4 Fig. 5

11. TECHNICAL ASSISTANCE

Before leaving the factory, the appliance was com-

pletely regulated and tested by expert specialised

personnel to guarantee the best operating results.

All repairs and settings must be performed with ut-

most care and attention, respecting national safety

regulations in force. Always contact your retailer

or our nearest Service Centre, giving details of the

problem, the appliance model and the serial num-

ber (on the rating plate on the rear panel).

For any maintenance the user can contact Tecnoe-

ka by calling the telephone numbers on the cover

or going to www.tecnoeka.com.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 225516 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 3,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 225516 Manual

Product: