741835
10
Zoom out
Zoom in
Previous page
1/36
Next page
10
EN
14. “PROGRAMMED” MODE
Up to 99 cooking programs (cycles) can be saved. Each program can include 1 or more cooking
steps (up to 4).
15. SAVING COOKING PROGRAMS
Follow the steps below to save a cooking program:
Press the
PROG
MEMO
button (led on) “P01” appears on
the display.
Press buttons
/ and select the required
program number (up to P99).
Set the relevant cooking cycle parameters follow-
ing the same procedure used for “manualmode.
Press and hold down the
PROG
MEMO
button for at least 5
seconds: the program is successfully saved with
the saved program number blinks on the display.
To cancel a saved program, simply replace it with a
new program (with the same number) where new
parameters are set for the new cooking cycle. The
new program must be saved by pressing the
PROG
MEMO
button.
16. COOKING WITH A SAVED PROGRAM
Follow the steps below to run a saved cooking pro-
gram:
Press the button
PROG
MEMO
“P01” appears on the display.
Press buttons
/ and select the required
program number
Press button
START
STOP
.
“P H” appears on the display (cooking chamber
“preheating” function).
The oven operates until it reaches a temperature
equal to the value set for step 1 (programmed cy-
cle) increased by 30°C.
When the preheating temperature is reached, “P – H”
blinks on the display and the buzzer sounds.
At this point, open the oven door, introduce food to
be cooked and close the door. the buzzer turns off
and the programmed cooking cycle starts.
N.B.: the “preheating” function is available (auto-
matically started) only in “programmed” cooking
modes.
When the oven is operating in “programmed”
mode,
set parameters can be displayed in the
same way as with “manual” mode.
For the user’s convenience, set parameters can
be changed during oven operations in “pro-
grammed” mode.
At the end of the programmed cooking cycle,
changed
parameters are automatically “RESET”
and return to the values initially saved in the pro-
gram.
17. MANUAL HUMIDIFYING
Humidity can be produced in the cooking cham-
ber (water solenoid valve on or activation of water
pump) at any time in the cooking cycle (in both
“manual and “programmed” mode) by pressing
the button
MANUAL
(led on).
Continuous humidity as long as the button is pressed.
If an automatic humidifying cycle is in progress,
press button
MANUAL
(water solenoid valve on or acti-
vation of water pump) to interrupt it. Release the
automatic humidifying cycle button to resume.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 225059 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 225059 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info