741088

Hendi 224847 Manual

5
Zoom out
Zoom in
Previous page
1/48
Next page
5
EN
Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
Before use
• Remove all protective packaging and wrapping.
• Check for the completeness of the product. In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty).
• Clean the machine thoroughly with a dry cloth or
a soft brush (not included).
• After fixing the machine on a suitable surface, the
cleaning operation can be completed by passing
a piece of pasta through the rollers and the cut-
ters (to remove any dust). Then, throw away this
the pasta used for this operation.
• Never wash the machine body or the accessory
under running water or the accessory in a dish-
washer.
Operation (Making pasta sheet)
• Position the machine on a suitable surface which
can bear the appliance’s weight.
• Fit the container/ tray (not supplied) to the appli-
ance’s openings for placing the pasta sheet.
• After turning the knob to the position “7”, place
part of the prepared dough on the rollers.
• Press down the button to start operation & mak-
ing pasta sheet.
• Insert the dough gently and this will roll out the
pasta. Repeat this operation until a flat sheet of
pasta is obtained.
• To reduce the thickness of the pasta sheet, press
down the button again of the appliance. And turn
the knob to reduce the distance between the pas-
ta rollers.
• Pass the pasta sheet repeatedly through the roll-
ers until it is of the desired thickness.
Note: Please check with your recipe for making the
dough.
Operation (Cutting)
• Position the machine on a suitable surface which
can bear the weight, fit the supplied clamp into
the opening, tightening the screw until the ma-
chine is firmly locked to the surface.
• Fit the container/tray (not supplied) to the pasta
machine’s openings for placing the pasta.
• Press down the button to start operation & cut-
ting the pasta sheet.
• Fit the pasta sheet to the machine with your de-
sired cutting blade (tagliatelle or fettuccine).
Cleaning and maintenance
• Attention! Unplugged the appliance before clean-
ing.
• Do not remove residues of pasta using sharp
utensils. (Use soft brushes, not supplied).
• Never wash the appliance body or the accessory
under running water or the accessory in a dish-
washer.
• Never wash any part of the appliance or the ac-
cessory in a dishwasher.
• Clean the appliance thoroughly with a dry cloth
or a soft brush.
• Check that the parts are perfectly dry before put-
ting them away.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 224847 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 224847 in the language / languages: English, German, Dutch, Italian, Polish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info