741161
12
Zoom out
Zoom in
Previous page
1/132
Next page
EN
12
VOLTAGE LACKING
In case of electric feeding breaking or if the machine
is disconnected from the electric net, this last one
will be able to be restarted only following the star-
ting function, after the electric feeding back or the
reconnection to the electric net.
CONTROLS AND VERIFICATIONS BEFORE STARTING
VERIFICATION / CONTROL MODALITIES AND CHECKS
Check that:
There aren’t inside the pot
extraneous objects
Sight control of the indicated parts, to check of objects or extraneous bodies
lacking as for example different tools, clothes, etc … and that there isn’t however
the food product
Check the cleaning:
Of the machine external sides
of the tool along its surface
of the tool external sides
All indicated parts surfaces, before the machine use must be checked visually to
verify their cleaning. In case of molds presence or other type of dirtiness, provide
with the cleaning procedure in accordance with the chapter 5 indications.
Check the integrity:
of the fixed protections
of the machine body
All fixed protections, etc.. must perform the function for which have been
foreseen. Indicated parts sight check to verify their integrity in their surface
external part. The parts must be however changed at the first erosion signals or
breaking (cfr. Authorized Assistance Center).
Check the functionality:
of the control system
parts / control about the
safety;
of the control devices.
All devices must perform the function for which have been foreseen. Control
directly the devices so that these ones determine the waiting function.
The actuators and all parts must be however changed to the first erosion signals
or breaking (cfr. Authorized Assistance Center).
Check the absence:
of strange noises after
the starting
During the functionality checking of the control devices, if there are strange
noises, due for example to a seizing or mechanical breaks, stop immediately the
machine and activate the maintenance service.
For any intervention type or for the parts change that
are damaged, activate the maintenance service.
The possible change must happen with manufactur-
er original products or at least of quality, safety and
equivalent characteristics. For analysis contact the
Authorized Assistance Center.
PUT IN FUNCTION
The machine operator can put in function the machi-
ne following in order the under reported indications:
Positive controls result for the preparation pre-
liminary operations,
Positive controls result for the electric feeding,
Plug connection in opportune current socket,
Positive controls result for the assembly,
Positive controls result / checks before the starting,
Positive controls result finalized to check the re-
spect of all safety conditions,
Introduce manually the feed product inside the pot,
With the use of both the hands take the machine
in the foreseen zones:
Place it with the tool inside the pot,
Start, maintain and handle it up to the end of the
feed product work,
When the food product has reached the desired
solidity, stop the machine and placed on a support
adequate bench,
Discharge manually the pot feed product, taking it
with both the hands and pouring out the feed
product where necessary.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 224359 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 224359 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info