741888

Hendi 223369 Manual

22
Zoom out
Zoom in
Previous page
1/48
Next page
22
EN
- Select the temperature button and with +/- introduce the value desired + press the the temperature button
for confirmation
- Select the time button and with +/- introduce the value desired + press the the time button for confirmation
- Select the Steam button and with +/- introduce the value desired + press the the Steam button for confir-
mation
- Select the cooking cycle button to go at second phase (in case the cooking process as different phases) and
you will see the Cooking cycle led on under N. 2. Now you can settle the time, temperature, steam as previ-
ously describe and go to “cooking cycle” N. 3. If you have 3 phases then introduce time, temperature, steam
and wait 5 seconds at the end for automatic memorization. In case you have only 1 or 2 phases on the new
phase leave “0” under time and wait 5 seconds for memorization.
- When program is memorized you can press START/STOP to activate the cooking process.
- The oven will start to pre-heat and after “beep” will be ready to load the food. After introduced the food will
start the program settled, the PHASES led always shows the current program phase.
- END flashes on the display at the end of a cooking cycle, fan, humidifying and heating stop and it beeps for
40 seconds.
It is permitted to modify program data is loaded before baking and cooking in execution, to adapt cooking
product needs.
For manual cooking cycle, all changes made before or during cooking are impermanent, i.e. are not persisted:
If you bring the unit into Standby and then back in ON the manual cycle is reset to default values.
Time of changes that were made during the cooking stage are valid only for cooking.
RETURN TO MANUAL COOKING
To go back to MANUAL you have to follow the procedure below to exit programs:
Press Cooking program button until MANU (manual) will appear on the display. Wait 5 seconds to confirm
selection.
TIME ON DISPLAY
When the oven started the cooking program the time display will show the countdown.
In case you use “INF” time the oven will show the count-up of cooking time.
POWER FAILURE
In case of power failure during the cooking cycle, the oven turns in OFF position.
SIGNALS AND ALARMS
All alarms are indicated by a buzzer. The buzzer can be silenced by pressing a key.
ERR = CHAMBER PROBE ALARM:
This is triggered if the chamber probe fails.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223369 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223369 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info