741888

Hendi 223369 Manual

21
Zoom out
Zoom in
Previous page
1/48
Next page
21
EN
• COOKING CYCLE
The oven is suitable for 3 different cooking phase for each cooking program (1,2,3).
• COOKING CYCLE LED
The led that is on will show you in which cooking phase is operating (1,2,3) .
• HEATING ELEMENTS LED
When heating elements are working the led is on.
• CELSIUS / FAHRENHEIT LED
The led for Celsius or Fahrenheit will be on to indicate in which condition the oven is operating.
• COOKING PROGRAMS
To program a cooking process press the button and acting on + / - you can select the program number to
set. After selected the program number confirm pressing on cooking program button. Each program can be
modified any time.
• AUTOMATIC PREHEATING
This function is automatic for all cooking programs (manual or programmable).
This pre-heats the oven to 20% value higher than the set temperature. This function is necessary to compen-
sate for the loss of heat through opening the door to put food in.
When a program starts the oven first starts this preheat cycle (“PRE” on the display and the first cooking cycle
led “P” will light), it beeps at the end and only stops when the door is opened. The previously selected program
starts automatically when the door is closed.
The beeping can be stopped by pressing any button other than opening the door. During pre-heating is not
possible to use the humidity.
MANUAL COOKING
Press ON/OFF button to active the oven and after setting TEMPERATURE, TIME, STEAM (see previous instruc-
tion) the cooking cycle begins by pressing START/STOP. The oven will start to pre-heat and after “beep” will
be ready to load the food. After introduced the food will start the program settled. The cooking cycle may be
stopped at any time by pressing START/STOP. During the cooking process you can modify the Temperature
and the Time, only the automatic STEAM figure cannot be changed during operating, you need to stop the oven
and modify manually.
Manual STEAM can be introduced any time pressing the STEAM button.
During the cooking process the time display will show the count-down.
END flashes on the display at the end of a cooking cycle, fan, humidifying and heating stop and it beeps for
40 seconds.
PROGRAMMED COOKING
The oven has 99 pre-programmed recipes, each one with 3 cooking phases (1,2,3,).
To create a new cooking program press the button and on display will appear “P01”, acting on + / - button you
go to the program number desired + press the cooking program button for confirmation.
Now the oven will be in position of first cooking cycle (N. 1 led will be on) and you can select the time, temper
-
ature and steam in the various phases as below:
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223369 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223369 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info